This article describes the main achievements in the development of phased antenna arrays (par) in the past decade. Provides an overview of the most famous systems based on the PAR and PAR based on MMIC technology - PAR in radar stations, PAR to control the laser and optical beams. The existing options for the design of the PAR:ferroelectric antenna array; plasma antenna with electronic scanning; reflective grating on 100-mm semiconductor wafers; wideband antenna arrays with aperture; antenna arrays with digital beam forming.

The article considers the results of field testing of prototype neonatology complex, implemented on basis of high-current thermoelectric batteries.

Researches allowing to expose the mechanism of error formation of the axial piston sizes of ship small-sized diesels rods for the purpose of improvement of production process technology and stabilization of geometrical parameters are given.

The results of the research on thread making in hard-to-machine materials are given. A new technology with use of combined core drill tap allowing the stabilization of the stock for further processing, correction of the hole axis and provision of larger severity of the tool is developed. The factors influencing on the quality and performance of thread making reliability and working capacity of the tap cutting tool are identified. The recommendations on tool friction and heating reduce in order to provide the larger severity and durability are given.

An analysis of existing technological process of machining screw submersible pump УН1ВС OAO Plant named. «Hajiyev» (Makhachkala). The main drawbacks of the technology of mechanical turning blanks screws technologies of grinding and polishing screw lead to deviation from the desired accuracy of dimensions and surface finish. Recommendations to improve the quality of screws to improve the technological process, increase its efficiency and effectiveness.

Work out of experimental assembly of boost motor which carry out front end of compressed air assembly permit to do complex probe BMD as airscrew and load characteristic with indicator test and warm-balance factors of diesel engine in a variety ways of mixing.

In the article of «The model of small mountain reservoir» with help of work out method of account of water volume of topographic explored reservoir. On the base of the studies of small mountain reservoir, profiles and form lead out dimensionless «relative complexity factor of width reservoir».

The work is devoted to theoretical investigations of the characteristics of a tetrahedral (square), hex and cylindrical (circular) honeycomb.
Evidence of theoretical researches allows to determine the carrying capacity of sandwich beams (TB), square, hexagonal and a cylindrical paper honeycomb and compare beam with any shape and size and has a greater load-bearing capacity, which is of interest technicians and designers.

The issues of regulation of seismic loads on structures using kinematic supports of highstrength concrete on the impregnated coarse aggregate and seismic isolation bearings Belleville. The results of experimental studies related to the obtaining of a new coarse aggregate and construction of seismic isolation bearings. Addresses the issues of interaction forces in the
hemispherical supports vibration process.

In work results of complex researches by definition of change of temperatures and thermal diffusivity factor on a thickness liner from a refractory concrete on a carborundum-chamotte-silicate- sodium composite knitting are resulted at single-sided heating depending on heating time. Results of definition of admissible speeds of heating liner in a temperature range 200-1000°С are resulted also.

Conducted to determine the effect of increasing the temperature of the product prior to sealing the jars for the duration of modes of heat sterilization.
It is revealed that the use of pre-heating the fruit in the banks before sealing provides the possibility of increasing the initial temperature of the syrup poured into the banks, increasing the initial temperature of the product, reducing the duration of the cooking process, and thereby
improving the quality of the finished product.

The results of studies on the development of new modes of heat sterilization compote cherry using stepwise heating in a stream of hot air and hot water dushevaniem air cooled rotating container. Revealed that the modes provide commercial sterility of finished products, reducing the length of the heat treatment and the quality of the finished product. Are some of the modes of heat sterilization step of cherry compote in a stream of heated air and water dushevaniem air-cooled rotating container.

In work modern data on molecular structure of water in the form of the state-of-the-art review are considered. The irreplaceable role of water in activity processes is shown. Ways of effective use of active forms of water in technologies are defined.

In this article systematized and summarized data on the synthesis of neweight-embered tellurium-containing heterocycles and new preparative methods described above produce heterocyclic tellurium.

The peculiarities of tomato cultivation and processing in conditions of plain area of Dagestan have been considered in the article. The layout of integrated tomato processing and the hardware layout of lines of tomato processind hae been described.
The new effective method of tomato-juice production is developed.

The article defines the best practices for achieving success in the implementation of management processes reengineering in the enterprise. It also presents a summary of the main stages, which should be followed in the implementation of activities

It is considered one of the efficient principle of management complex social-economic object (on example of state premises management) in spontaneous changing condition modern market. The offered algorithm of the operation self-organizing managerial system complex object, providing efficient their behavior in sloppy surrounding ambience.

In article features of an integrated approach of an efficiency evaluation of production taking into account economic, ecological and social its components are considered.

The franchise is currently one of the most effective tools to enhance the efficiency of small business. It gives an opportunity to combine the advantages of small and large business. The
enterprises receiving advanced technology and support on the basis of franchising, become more competitive. The system of franchising every year becomes more and more popular with Russian entrepreneurs. While on the path of its effective development raises a number of issues requiring systematic solutions.