Method for forming a titanium-germanium contact layer for thermostabilization of transistors

Objective. The objective of the study is to obtain high-quality and reproducible electrophysical parameters of thin-film metal layers, the formation technology of which determines the reliability and quality of microelectronic products – silicon transistors.

Methods. A method for forming a two-layer titanium-germanium metallization to create a contact and remove heat from the collector junction of high-power semiconductor transistors on the reverse side of plates with formed structures is proposed. The proposed method ensures the quality of the soldered connection and thermal stabilization of semiconductor devices, increasing the reliability of the studied devices in radio electronic equipment systems.

Results. This combination of sprayed metals provides a reliable contact to the collector area when the crystal is placed on the base of the case, which reduces the resistance of the ohmic transition and increases the output of suitable devices.

Conclusion. Based on the results of experimental procedures, the optimal thicknesses of metal layers deposited on the reverse side of transistor crystals were obtained during the formation of metallization to fit crystals on the base of the case. The Ti-Ge system stability is studied. The technical result of the research is to improve the quality of planting by obtaining a uniform distribution of the Ti-Ge layer in a single technological cycle at a given temperature with a certain thickness for each metal separately.

1. Aliyev SH. D., Shakhmayeva A. R., Shangereyeva B. A. Sovremennyye tekhnologicheskiye metody kontrolya payki // Sb. tezisov dokl. XXIV itogovoy nauch.-tekhn. konf. prepodavateley, sotrudnikov, aspirantov i studentov DGTU, 21-24 apr., 2003. Makhachkala: DGTU, 2003. S. 87. [Aliev sh. D., Shakhmayeva A. R., Shangereeva B. A. Modern technological methods of soldering control // Collection of abstracts of the XXIV final scientific and technical conference of teachers, employees, postgraduates and students of DSTU, 21-24 APR., 2003. Makhachkala: DSTU, 2003. p. 87. (In Russ)]

2. Belov A.N., Golishnikov A.A., Kostyukov D.A., Shevyakov V.I.// Metallizatsiya vysokotemperaturnykh kremniyevykh IS na osnove splava vol'frama s titanom. Izvestiya vysshikh uchebnykh zavedeniy. Elektronika. 2019.T.24. №1. S.22-29. [Belov A. N., Golishnikov A. A., Kostyukov D. A., Shevyakov V. I.// Metallization of high-Temperature silicon ICS based on a tungsten-titanium alloy. Newsofhighereducationalinstitutions. Electronics. 2019.T.24. No. 1. pp. 22-29. (In Russ)]

3. Burmakov A.P., Kuleshov V.N. // Vysoko adgezionnaya metallizatsiya keramiki plenkami oksida titana izmenyayushchego tolshchine sostava. Vestnik BGU. Seriya 1, Fizika. Matematika. Informatika. 2007. №1. S. 24-28. [Burmakov A. P., Kuleshov V. N. // Highly adhesive metallization of ceramics With titanium oxide films of thickness-changing composition. Bulletinof BSU. Series 1, Physics. Mathematics. Computerscience. 2007. No. 1. pp. 24-28. (In Russ)]

4. Vanyukhin K.D., Zakharchenko R.V., Seydman L.A., Pashkov M.V., Voronova A.A., Blinov P.A., Yevseyeva Ye.M., Minnebayev S.V.// Issledovaniye struktury i morfologii poverkhnosti dvukhsloynoy metallizatsii TI/AL. V knige: Nauchnaya sessiya NIYAU MIFI-2014. Annotatsii dokladov: v 3-kh tomakh.O.N. Golotyuk. 2014. S.85. [Vanyukhin K. D., Zakharchenko R. V., Seidman L. A., Pashkov M. V., Voronova A. A., Blinov P. A., Evseeva E. M., Minnebaev S. V.// Investigation of the structure and morphology of the surface of two-layer metallization TI/AL. In the book: scientific session of MEPhI-2014. Abstracts of reports: in 3 Vol.O. N. Golotyuk. 2014. p. 85. (In Russ)]

5. Gorlov M.I., Meshkova M.A. // Formirovaniye metallizatsii na obratnoy storone kremniyevykh plastin. Vestnik Voronezhskogo gosudarstvennogo tekhnicheskogo universiteta. 2009. T. 5. № 1. S. 95-97. [Gorlov M. I., Meshkova M. A. // formation of metallization on the reverse side of silicon plates. BulletinoftheVoronezhstatetechnicalUniversity. 2009. Vol. 5.No. 1. pp. 95-97. (In Russ)]

6. Gromov D.G., Mochalov A.I./Materialy i protsessy formirovaniya sistem metallizatsii kremniyevykh integral'nykh skhem. // Uch. posobiye. M.: MIET, 2006. S.180. [Gromov D. G., Mochalov A. I. / Materials and processes of formation of metallization systems of silicon integrated circuits//Uch. manual. Moscow: MIET, 2006. p.180. (In Russ)]

7. Ismailov T.A., Aliyev SH.D., Shakhmayeva A.R.,ShangereyevaB.A. Kontrol' kachestva posadki kristalla na osnovaniye korpusa (tezisy dokladov). Izmereniye, kontrol', informatizatsiya: sbornik trudov Mezhdunarodnoy nauchno-tekhnicheskoy konferentsii. Barnaul: AGTU, 2004. S. 55-56. [Ismailov T. A., Aliev sh. D., Shakhmayeva A. R., Shangereeva B. A. quality Control of crystal landing on the base of the case (abstracts). Measurement, control, Informatization: proceedings of the International scientific and technical conference. Barnaul: AGTU, 2004, pp. 55-56. (In Russ)]

8. Ismailov T. A., Shakhmayeva A. R. Tranzistornyye struktury silovoy elektroniki. SPb: Politekhnika, 2011. 125 s. [Ismailov T. A., Shakhmayeva A. R. Transistor Structures of power electronics. SaintPetersburg: Politechnika, 2011. 125 p. (In Russ)]

9. Ismailov T.A., Shakhmayeva A.R. Eksperimental'noye issledovaniye i optimizatsiya tekhnologicheskogo protsessa formirovaniya kontakta k kollektornoy oblasti kremniyevykh tranzistorov// Bazovyye protsessy formirovaniya aktivnykh oblastey struktury moshchnykh kremniyevykh tranzistorov. Spb.: Politekhnika, 2009. S. 119. [Ismailov T. A., Shakhmayeva A. R. experimental research and optimization of the technological process of forming a contact to the collector region of silicon transistors// Basic processes of formation of active regions of the structure of high-power silicon transistors. SPb.: Politechnika, 2009, P. 119. (In Russ)]

10. Kolpakov A. Novyye tekhnologii rasshiryayut gorizonty silovoy elektroniki//Komponenty i tekhnologii. 2007. № 4. [Kolpakov A. New technologies expand the horizons of power electronics//Components and technologies. 2007. № 4. (In Russ)]

11. Lanin V. Payayemost' vyvodov elektronnykh komponentov//Tekhnologii v elektronnoy promyshlennosti. 2010. № 4. [Lanin V. Solderability of electronic component leads//Technologies in the electronics industry. 2010. № 4. (In Russ)]

12. Klimachev I.I., Litvinova T.V., Sidorenko S.I. Issledovaniye stabil'nosti sistemy Cr-Cu-Ni-Au, so sloyami, poluchennymi elektroliticheskim osazhdeniyem. Mikroelektronika. 1994, T.23. Vyp.2. s. 91-95. [Klimachev I. I., Litvinova T. V., Sidorenko S. I. stability study of the Cr-Cu-Ni-Au system with layers obtained by electrolytic deposition. Microelectronics, 1994, Vol. 23, issue 2, pp. 91-95. (In Russ)]

13. Mazel' Ye.Z., Press F.P. Planarnaya tekhnologiya kremniyevykh priborov. Moskva, «Energiya», 1974 g., str. 318-321. [Mazel E. Z., Press F. P. Planar technology of silicon devices. Moscow, Energia, 1974, pp. 318-321. (In Russ)]

14. Patent 2460168 (RU), H 01 L 21/52. Sposob payki kristallov na osnove karbida kremniya / V. V. Zenin, V. I. Boyko, A. V. Kochergin, B. A. Spiridonov, A. V. Strogonov; opubl. 27.08.2012. Byul. № 19. [Patent 2460168 (RU), H 01 L 21/52. Method for soldering crystals based on silicon carbide / V. V. Zenin, V. I. Boyko, A.V. Kochergin, B. A. Spiridonov, A.V. Strogonov; publ. 27.08.2012. Byul. no. 19. (In Russ)]

15. Patent RF №2375787 «Sposob posadki kremniyevogo kristalla na osnovaniye korpusa»/T.A. Ismailov, B.A. Shangereyeva, A.R. Shakhmayeva. Opubl.10.12.2009. Bil. №34. [ Patent of the Russian Federation No. 2375787 "Method for planting a silicon crystal on the base of the case" /T. A. Ismailov, B. A. Shangereeva, A. R. Shakhmayeva. Publ.10.12.2009. Bill. No. 34. (In Russ)]

16. Patent 2007127165/28 RF, MPK H01L 21/283. Sposob formirovaniya kontaktnogo sloya titan-germaniy / T. A. Ismailov, A. R. Shakhmayeva, B. A. Shangereyeva. Opubl.10.01.2009. Byul. №1. [Patent 2007127165/28 of the Russian Federation, IPC H01L 21/283. A method of forming a contact layer of titanium-germanium / T. A. Ismailov, A. R. Shakhmaeva, B. A. Shangareeva.Publ.10.01.2009. Byul. No. 1. (In Russ)]

17. Sen'ko S.F., Belous A.I., Plebanovich V.I.// Sposob izgotovleniya sistemy metallizatsii kremniyevykh poluprovodnikovykh priborov. Patent na izobreteniye RU 2333568 C1, 10.09.2008. Zayavka №200614979/28 ot 04.12.2006. [Senko S. F., Belous A. I., Plebanovich V. I.// Method for manufacturing a metallization system for silicon semiconductor devices. The patent for the invention EN 2333568 C1, 10.09.2008. Application no. 200614979/28 dated 04.12.2006. (In Russ)]

18. Shakhmayeva A.R. Optimizatsiya tekhnologii posadki kristalla kremniyevogo tranzistora na osnovaniye korpusa // Proyektirovaniye i tekhnologiya elektronnykh sredstv, 2006. №4. S.26-27. [Shakhmayeva A. R. Optimization of the technology for plac ing a silicon transistor crystal on the base of the case // Design and technology of electronic means, 2006, No.4.pp. 26-27. (In Russ)]

19. Jacobs, B. Optimisation of the Ti/Al/Ni/Au ohmic contact on AlGaN/GaN FET structures. / B. Jacobs, M. C. J. C. M. Kramer, E. J. Geluk, F. Karouta // J. Cryst. Growth. 2002. Vol. 241. рр. 15-18.

20. Liu, Q. Z. A review of the metal−GaN contact technology / Q. Z. Liu, S. S. Lau // Solid State Electron. 1998. Vol. 42, No 5. pp. 677-691.

21. Wang C., Cho S.-J., Kim N.-Y. Optimization of ohmic contact metallization process for AlGaN/GaN high electron mobility transistor.Transactions on Electrical and Electronic Materials. 2013, Vol.14, № 1, pp. 32-35.

22. Yoon S., Bang J., Lee H., Oh J. Interfacial AlN formation of Si/Ti/Al/Cu Ohmic contact for AlGaN/GaN high-electronmobility transistors. Microelectronic Engineering. 2016, No. 151, pp. 60-63.