CALCULATION OF THE FLAT BENDING SHAPE STABILITY OF RECTANGULAR CROSS SECTION BEAMS WITH REGARD TO CREEP
https://doi.org/10.21822/2073-6185-2019-46-1-169-176
Abstract
Objectives. The article presents the conclusion of the resolving equation for calculating the stability of the flat form of deformation of prismatic beams, taking into account the rheological properties of the material.
Method. The problem is reduced to a second-order differential equation for the twist angle, which is solved numerically by the finite difference method in combination with the Euler method.
Result. The obtained differential equation allows one to take into account the presence of initial imperfections in the form of the initial deflection of the beam, the initial angle of twist, and also the eccentricity of the applied load. The solution of the test problem for a cantilever polymer beam under the action of a concentrated force is presented. The non-linear Maxwell-Gurevich equation is used as the creep law. The value of the long-term critical load is introduced and it is shown that with a load less than the long-term critical creep is limited. It has been established that, as with the squeezed rods, with a load less than the long-term critical, the growth rate of the displacements with time decays. When F = F_dl, the displacements grow at a constant speed, and when F> F_dl, the growth rate of displacements increases with time. The results obtained confirm the validity of the chosen method.
Conclusion. A universal resolving equation is obtained for calculating the stability of a flat shape of bending of rectangular beams, suitable for arbitrary creep laws.
About the Authors
I. M. Zotov
Don State Technical University
Russian Federation
1 Gagarin Square, Rostov-on-Don 344002.
Russian Federation
1 Gagarin Square, Rostov-on-Don 344002.
A. S. Chepurnenko
Don State Technical University
Russian Federation
1 Gagarin Square, Rostov-on-Don 344002.
Russian Federation
1 Gagarin Square, Rostov-on-Don 344002.
S. B. Yazyev
Don State Technical University
Russian Federation
1 Gagarin Square, Rostov-on-Don 344002.
Russian Federation
1 Gagarin Square, Rostov-on-Don 344002.
References
1. Karamysheva, A.A. Raschet na ustoychivost' ploskoy formy deformirovaniya odnoskatnoy balki / A.A. Karamysheva, N.I. Nikora, S.B. YAzyyev // Aktual'nyye problemy tekhnicheskikh nauk v Rossii i za rubezhom. Sbornik materialov mezhdunarodnoy nauchno-prakticheskoy konferentsii. – Ufa: Aeterna, 2015. – S. 32-35. [Karamysheva, A.A. Calculation of the stability of the flat form of deformation of a single-beam beam / A.A. Karamysheva, N.I. Nikora, S.B. Yazyev // Actual problems of technical sciences in Russia and abroad. Collection of materials of the international scientific-practical conference. - Ufa: Aethern, 2015. - p. 32-35. (In Russ)]
2. Karamysheva, A.A. Raschet derevyannykh balok peremennogo secheniya na ustoychivost' ploskoy formy izgiba pri proyektirovanii unikal'nykh zdaniy i sooruzheniy / A.A. Karamysheva // Sbornik statey II stroitel'noy mezhdunarodnoy studencheskoy shkoly-seminara instituta PGS «Problemy proyek-tirovaniya i stroitel'stva vysotnykh, unikal'nykh zdaniy i sooruzheniy». – Rostov n/D: «Kalligraf», 2016. – S. 44-48. [Karamysheva, A.A. Calculation of wooden beams of variable cross section for the stability of the flat shape of the bend when designing unique buildings and structures / A.A. Karamysheva // Collection of articles of the II Construction International Student School-Seminar of the Institute of Industrial and Civil Engineering “Problems of the design and construction of high-rise, unique buildings and structures”. - Rostov n / a: “Calligrapher”, 2016. - p. 44-48. (In Russ)]
3. Karamysheva, A.A. Vypuchivaniye dvukhskatnoy balki pri chistom izgibe / A.A. Karamysheva, S.B. YAzyyev, A.Ye. Dudnik // Aktual'nyye problemy tekhnicheskikh nauk v Rossii i za rubezhom. Sbornik ma-terialov mezhdunarodnoy nauchno-prakticheskoy konferentsii. – Ufa: Aeterna, 2015. – S. 35-37. Karamysheva, A.A. Vypuchivaniye dvukhskatnoy balki pri chistom izgibe / A.A. Karamysheva, S.B. YAzyyev, A.Ye. Dudnik // Aktual'nyye problemy tekhnicheskikh nauk v Rossii i za rubezhom. Sbornik ma-terialov mezhdunarodnoy nauchno-prakticheskoy konferentsii. – Ufa: Aeterna, 2015. – S. 35-37. [Karamysheva, A.A. Buoyancy of a double-slope beam with a pure bend / A.A. Karamysheva, S.B. Yazyev, A.E. Dudnik // Actual Problems of Technical Sciences in Russia and Abroad. Collection of materials of the international scientific- practical conference. - Ufa: Aethern, 2015. - p. 35-37. (In Russ)]
4. Karamysheva, A.A. Raschet na ustoychivost' ploskoy formy izgiba balok peremennoy zhestkosti / A. A. Karamysheva, S. B. YAzyyeva, A. S. Chepurnenko // Izvestiya vysshikh uchebnykh zavedeniy. Severo-Kavkazskiy region. Seriya: Tekhnicheskiye nauki. — 2016. — № 1 (186). — S. 95-98. [ Karamysheva, A.A. Calculation of the stability of the flat shape of bending of beams of variable stiffness / A. A. Karamysheva, S. B. Yaziyeva, A. S. Chepurnenko // News of higher educational institutions. North Caucasus region. Series: Engineering. - 2016. - № 1 (186). - pp. 95-98. (In Russ)]
5. Karamysheva, A.A. Ustoychivost' ploskoy formy izgiba odnoskatnoy doshchatokleyenoy balki / A.A. Karamysheva, A.S. Chepurnenko, B.M. YAzyyev // Nauchnoye obozreniye. — 2016. — № 7. — S. 25-27 [Karamysheva, A.A. Stability of a flat form of bending of a single-sided glue-beam / A.A. Karamysheva, A.S. Chepurnenko, B.M. Yazyev // Scientific Review. - 2016. - № 7. - p. 25-27. (In Russ)]
6. Chepurnenko, A. S. Chislennyy raschet balok pryamougol'nogo poperechnogo secheniya na ustoychivost' ploskoy formy izgiba / A. S. Chepurnenko, V. V. Ul'yanskaya, D. A. Vysokovskiy, I. M. Zotov // In-zhenernyy vestnik Dona. – 2018. – №2. – URL: http://ivdon.ru/ru/magazine/archive/N2y2018/4854 [Chepurnenko, A. S. Numerical calculation of rectangular cross-section beams on the stability of a flat bend / A. S. Chepurnenko, V. V. Ulianskaya, D. A. Vysokovsky, I. M. Zotov // In-Donor Bulletin. 2018. №2. URL: http://ivdon.ru/ru/magazine/archive/N2y2018/4854(In Russ)]
7. Chepurnenko, A.S. Calculation of wooden beams on the stability of a flat bending shape enhancement / A. S. Chepurnenko, V.V. Ulianskaya, S.B. Yazyev, I.M. Zotov // MATEC Web of Conferences. 2018. Vol. 196. URL: https://www.matec-conferences.org/articles/matecconf/abs/2018/55/matecconf_rsp2018_01003/matecconf_rsp2018_01003.html Chepurnenko, A.S. A. S. Chepurnenko, V.V. Ulianskaya, S.B. Yazyev, I.M. Zotov // MATEC Web of Conferences. 2018. Vol. 196. URL: https://www.matec-conferences.org/articles/matecconf/abs/2018/55/matecconf_rsp2018_01003/matecconf_rsp2018_01003.html (In Russ)]
8. Ishchenko, A.V. Energeticheskiy metod v raschetakh balok pryamougol'nogo poperechnogo secheniya pri bo-kovom vypuchivanii / A.V. Ishchenko, I.M. Zotov // Inzhenernyy vestnik Dona. – 2019. – №1. – URL: http://ivdon.ru/ru/magazine/archive/n1y2019/5583 [Ischenko, A.V. Energy method in calculations of rectangular crosssection beams with side bulging / A.V. Ischenko, I.M. Zotov // Engineering Herald of the Don. - 2019. - №1. - URL: http://ivdon.ru/ru/magazine/archive/n1y2019/5583(In Russ)]
9. Karamisheva, A.A. Calculation of Plane Bending Stability of Beams with Variable Stiffness / A.A. Kar-amisheva, S.B. Yazyev, A.A. Avakov // Procedures Engineering. - 2016. - Vol. 150. - Pp. 1872-1877.
10. Andreev, V.I. Free Torsion of Viscoelastic Rod with Non-circular Cross-section / V.I. Andreev, A.S. Chepurnenko, B.M. Jazyev // Procedia Engineering. - 2016. - Vol.165. Pp. 1147–1151.
11. Nikora, N.I. Opredeleniye dlitel'nykh kriticheskikh nagruzok dlya szhatykh polimernykh sterzhney pri nelineynoy polzuchesti / N. I. Nikora, A. S. Chepurnenko, S. V. Litvinov // Inzhenernyy vestnik Dona. — 2015. — № 1. —URL: ivdon.ru/ru/magazine/archive/n1p2y2015/2796. [Nikora, N.I. Determination of long-term critical loads for compressed polymer rods with nonlinear creep / N.I. Nikora, A.S. Chepurnenko, S.V. Litvinov // Dona Engineering Bulletin. 2015. № 1.URL: ivdon.ru/ru/magazine/archive/n1p2y2015/2796.
12. Vol'mir, A. S. Ustoychivost' deformiruyemykh sistem. / A.S. Vol'mir. – M.: Nauka, 1975. – 984 s. [Volmir, A.S. Stability of deformable systems. / A.S. Volmir. - M .: Science, 1975. 984 p.1. (In Russ)]
Review
For citations:
Zotov I.M., Chepurnenko A.S., Yazyev S.B. CALCULATION OF THE FLAT BENDING SHAPE STABILITY OF RECTANGULAR CROSS SECTION BEAMS WITH REGARD TO CREEP. Herald of Dagestan State Technical University. Technical Sciences. 2019;46(1):169-176. (In Russ.) https://doi.org/10.21822/2073-6185-2019-46-1-169-176
Views:
711
Email this article 
