Optimization of strutted beam parameters
https://doi.org/10.21822/2073-6185-2020-47-4-162-171
Abstract
Objective. The objective of the research is to design strutted beams that have optimal parameters for metal consumption.
Methods. A mathematical simulation of the operation of a strutted beam with elastic support in the middle of the span is used. The calculation formulas are obtained based on the solution of the corresponding differential equation of the transverse bend of the upper crossbar of the strutted beam.
Results. A method has been developed to optimize the design parameters of a single-strut beam. Constructive calculation schemes are given, as well as formulas that allow assigning design parameters ensuring a minimum of metal consumption while maintaining the technological simplicity of manufacturing a strutted beam. An algorithm is constructed that can be used to design single-strut beams. The resulting calculation formulas are brief and easy to use.
Conclusion. The proposed method allows reducing the weight of a single-strut beam by up to 60% compared to conventional beams.
About the Authors
A. K. Yusupov
Daghestan State Technical University
Russian Federation
Russian Federation
Abusupyan K.Yusupov, Dr. Sci. (Technical), Prof., Department of Building Structures and Hydraulic Structures
70 I. Shamilya Ave., Makhachkala 367026
H. M. Musеlеmov
Daghestan State Technical University
Russian Federation
Russian Federation
Khairulla M.Muselemov, Cand.Sci. (Technical), Assoc. Prof., Department of Building Structures and Hydraulic Structures
70 I. Shamilya Ave., Makhachkala 367026
T. O. Ustarhanov
Daghestan State Technical University
Russian Federation
Russian Federation
Tagir O. Ustarkhanov, Assistant,Department of Building Materials and Engineering Networks
70 I. Shamilya Ave., Makhachkala 367026
References
1. Akayev N.K., Yusupov A.K. Algoritm rascheta shprengel'nykh podkranovykh balok. VESTNIK DGTU, Tom 42, №3, 2016 g. C.119-131. [Akaev N.K., Yusupov A.K. Algorithm for calculating truss crane beams. Herald of Daghestan State Technical University. Technical Sciences, Vol.42, No. 3, 2016. pp.119-131. (In Russ)]
2. Azhermachev S.G. Priblizhennyy metod rascheta shprengel'nykh podkranovykh balok. Stroitel'stvo i tekhnogennaya bezopasnost'. Vypusk 37, 2011 g. C.34-39. [Azhermachev S.G. Approximate method for calculating truss crane beams. Construction and man-made safety. Issue 37, 2011. pp.34-39. (In Russ)]
3. Klykov V.M., YA.M. Likhtarnikov Raschet stal'nykh konstruktsiy. M–75g. C.30-41. [Klykov VM, Ya.M. Likhtarnikov Calculation of steel structures. M.:75g. pp.30-41. (In Russ)]
4. Livandovskiy N.N., Bogatyreva I.V. Usileniye zhelezobetonnykh balok shprengel'nymi zatyazhkami i vlozhennymi shprengelyami. XII mezhdunarodnaya konferentsiya studentov i molodykh uchenykh «perspektivy razvitiya fundamental'nykh nauk» Rossiya, Tomsk, 21-24 aprelya 2015 g. S.1338-1340. [Livandovsky N.N., Bogatyreva I.V. Reinforcement of reinforced concrete beams with truss ties and embedded trusses. XII International Conference of Students and Young Scientists "Prospects for the Development of Fundamental Sciences" Russia, Tomsk, April 21-24, 2015. pp.1338-1340. (In Russ)]
5. Muselemov KH.M., Ustarkhanov O.M., Yusupov A.K. Razrabotka i issledovaniye shprengel'nykh balok novoy raskroyki. V Mezhdunarodnaya nauchno-prakticheskoy konferentsii "Nauchnyye issledovaniya: ot teorii k praktike". Tekhnicheskiye nauki. Tom 2. G. Cheboksary. 2015. s.62-70. [Muselemov Kh.M., Ustarkhanov O.M., Yusupov A.K. Development and research of new cut truss beams. V International scientific-practical conference "Scientific research: from theory to practice". Technical science. Vol. 2.G. Cheboksary. 2015. pp.62-70. (In Russ)]
6. Metallicheskiye konstruktsii» – pod redaktsiyey Ye.I. Belenya, Moskva, Stroyizdat, 1986 g. C.382-384. [Metal structures. Edited by E.I. Belenya, Moscow, Stroyizdat, 1986, pp. 382-384. (In Russ)]
7. Metallicheskiye konstruktsii» - pod redaktsiyey YU.I. Kudishina, Moskva, Akademiya, 2011g. C.439-442. [Metal structures. Edited by Yu.I. Kudishina, Moscow, Academy, 2011 pp.439-442. (In Russ)]
8. Pat. 130333 RF. MPK E04G 23/02. Shprengel' dlya usileniya i obespecheniya zhivuchesti izgibayemogo zhelezobetonnogo elementa / V.S. Plevkov, G.I. Odnokopylov, I.V. Bogatyreva. Zayavleno 08.02.2013; Opubl. 20.07.2013, Byul. № 20. 5 s. [Pat. 130333 RF. IPC E04G 23/02. Sprengel for strengthening and ensuring the survivability of a bent reinforced concrete element / V.S. Plevkov, G.I. Odnokopylov, I.V. Bogatyrev. Stated 02/08/2013; Publ. 20.07.2013, Bul. No. 20. 5 p. (In Russ)]
9. Stal'nyye konstruktsii. Spravochnik konstruktora. Pod red. Mel'nikova N.P. M.: Stroyizdat,1980. C.195-196. [Steel structures. Constructor reference. Ed. Melnikova N.P. M .: Stroyizdat, 1980. pp.195-196. (In Russ)]
10. SP 16.13330.2017 «Stal'nyye konstruktsii». M.: Standartinform, 2017. AO "NITS "Stroitel'stvo" TSNIISK im. V.A. Kucherenko, 92 s. [SP 16.13330.2017 "Steel structures". M .: Standartinform, 2017. JSC "Research Center" Construction "- TsNIISK named after V.A.Kucherenko, 92 p. (In Russ)]
11. Ustarkhanov O.M., Yusupov A.K., Muselemov KH.M. Shprengel'nyye podkranovyye balki. Makhachkala: DGTU, 2016. 120 s. [Ustarkhanov OM, Yusupov AK, Muselemov Kh.M. Sprengel crane beams. Makhachkala: DSTU, 2016.120 p. (In Russ)]
12. F. Khart (Myunkhen), V. Khenn (Braunshvayg), KH. Zontag (Berlin), Moskva, Stroyizdat, 1977g. «Atlas stal'nykh konstruktsiy». S. 37-84 [F. Hart (Munich), W. Henn (Braunschweig), H. Sontag (Berlin), Moscow, Stroyizdat, 1977. "Atlas of Steel Structures". pp. 37-84 (In Russ)]
13. Yusupov A.K. «Metallicheskiye konstruktsii v voprosakh, v otvetakh i v proyektirovanii». Makhachkala, Dagestanskiy gosudarstvennyy tekhnicheskiy universitet. GUP «Tipografiya DNTS RAN» , 2010. [Yusupov A.K. "Metal structures in questions, answers and design." Makhachkala, Daghestan State Technical University. State Unitary Enterprise "Printing House of the DSC RAS", 2010. (In Russ)]
14. Yusupov A.K. «Metody prikladnoy matematiki v stroitel'noy mekhanike», tom 1. Makhachkala, Dagestanskiy gosudarstvennyy tekhnicheskiy universitet. GUP «Tipografiya DNTS RAN» , 2008. [Yusupov A.K. "Methods of Applied Mathematics in Structural Mechanics", Volume 1. Makhachkala, Daghestan State Technical University. State Unitary Enterprise "Printing House of the DSC RAS", 2008. (In Russ)]
15. Yusupov A.K. «Metody prikladnoy matematiki v stroitel'noy mekhanike», tom 4. Makhachkala, Dagestanskiy gosudarstvennyy tekhnicheskiy universitet. GUP «Tipografiya DNTS RAN» , 2008. [Yusupov A.K. "Methods of Applied Mathematics in Structural Mechanics", Volume 4. Makhachkala, Daghestan State Technical University. State Unitary Enterprise "Printing House of the DSC RAS", 2008. (In Russ)]
16. Yusupov A.K., Muselemov KH.M., Ustarkhanov T.O., Dzhalalov SH.G. «Issledovaniye metalloderevyannoy balki». «Vestnik Mashinostroyeniya», №12, 2019 [Yusupov A.K., Muselemov H.M., Ustarkhanov T.O., Dzhalalov Sh.G. "Study of a metal-wood beam". "Bulletin of Mechanical Engineering", No. 12, 2019. (In Russ)]
Review
For citations:
Yusupov A.K., Musеlеmov H.M., Ustarhanov T.O. Optimization of strutted beam parameters. Herald of Dagestan State Technical University. Technical Sciences. 2020;47(4):162-171. (In Russ.) https://doi.org/10.21822/2073-6185-2020-47-4-162-171
Views:
552
Email this article 
