Determination of dynamic properties of the caterpillar drive of hydraulic reclamation machines and the method of articulated attachment of the working body of the trenchless pipelayer

Objective. The objective of the study is to determine the requirements for various devices of hydraulic reclamation machines, which are widely used in the construction of canals and drains, to maintain a given slope, as well as the calculation of the executive mechanism that serves to eliminate the oscillating movement of the working body relative to the line of the specified slope.

Methods. A mathematical description of the vibrations of the working body for caterpillar hydraulic reclamation machines with mounted working bodies is given.

Results. The article presents the results of research to identify the main factors affecting the oscillations of the working body of caterpillar reclamation machines. As a result of theoretical and experimental studies, it was found that when a caterpillar machine with a rigid undercarriage crosses single and multiple irregularities, the movement of the cutting edge of the rigidly mounted working body is graphically depicted by sinusoidal curves. The obtained dependencies allow conducting calculations of the automatic system of maintaining the specified slope and establish the area of stable modes of system operation. A geometric method for optimizing the hinge linkage of the working body of trenchless pipelayer is presented.

Conclusion. The proposed methods of improving the performance of caterpillar hydraulic reclamation machines with mounted working bodies when moving on uneven ground surfaces can be used to create a wide class of mounted earthmoving machines, both with passive and active working bodies.

1. Batmanov E.Z., Gasanov T.G., Guseynov M.R. Modelirovaniye protsessa rezaniya mineral'nykh gruntov passivnym rabochim organom drenoukladchika pri stroitel'stve zakrytogo drenazha. Vestnik Dagestanskogo gosudarstvennogo tekhnicheskogo universiteta. Tekhnicheskiye nauki. 2018;45 (3):165-174. DOI:10.21822/2073-6185-2018-45-3-165-174. [Batmanov E.Z., Hasanov T.G., Guseinov M.R. Modeling the process of cutting mineral soils by the passive working body of the drainage machine during the construction of a closed drainage. Herald of the Daghestan State Technical University. Technical science. 2018; 45 (3): 165-174. DOI: 10.21822/2073-6185-2018-45-3-165-174. (In Russ)]

2. Maslov B.S. Puti sovershenstvovaniya osushitel'nykh sistem. Trudy VNIIGiM im.A.N. Kostyakova. Tom.52, Moskva, 1972. S.5-21. [Maslov B.S. Ways to improve drainage systems. Proceedings of VNIIGiM named after A.N. Kostyakov. Vol. 52, Moscow, 1972. p pp. 5-21. (In Russ)]

3. Tomin Ye.D. Mekhanizatsiya stroitel'stva zakrytogo drenazha. Moskva, Izdatel'stvo «Kolos», «Khlopkovodstvo», 1978. S.36- 40. [Tomin E. D. Mechanization of closed drainage construction. Moscow, Publishing House "Kolos", "Khlopovodstvo", 1978. pp.36-40. (In Russ)]

4. Gasanov T.G. Ustroystvo termicheskogo krotovogo drenazha. Moskva, Izdatel'stvo «Kolos», «Khlopkovodstvo», 1978. S.40- 41. [Gasanov T.G. Thermal mole drainage device. Moscow, Publishing House "Kolos", "Cotton-growing", 1978. pp.40-41. (In Russ)]

5. Gasanov T.G. Prokladka krotovogo drenazha s termicheski zakreplennymi stenkami. Moskva, Izdatel'stvo «Kolos», «Mekh. i elektr.sots. sel's. khozyaystva», 1978. S.24-26. [Gasanov T.G. Laying of a mole drain with thermally fixed walls. Moscow, Kolos Publishing House, Fur. and electrical social. sels. economy ", 1978. pp.24-26. (In Russ)]

6. Gasanov T.G. i dr. Avtorskoye svidetel'stvo №630338 na izobreteniye «Krotovatel'». Zaregistrirovano v Gosudarstvennom reyestre izobreteniy SSSR 07.07.1978 goda. [Gasanov T.G. and others. Inventor's certificate No. 630338 for the invention "Molecaster". Registered in the State Register of Inventions of the USSR on 07.07.1978. (In Russ)]

7. Beylin D.KH. Mekhanizatsiya drenazhnykh rabot. Perspektivy mekhanizatsii stroitel'stva drenazha. Moskva, Izdatel'stvo «Kolos», 1975, 256 s [Beilin D.Kh. Drainage mechanization. Prospects for mechanization of drainage construction. Moscow, Kolos Publishing House, 1975, 256 p. (In Russ)]

8. Tomin Ye.D., Kazakov V.S. Opyt stroitel'stva, ekspluatatsii i remonta zakrytogo drenazha na osushayemykh zemlyakh. Moskva, Izdatel'stvo «Kolos», 1970, 114 s. [Tomin E.D., Kazakov V.S. Experience in the construction, operation and repair of closed drainage systems on drained lands. Moscow, Kolos Publishing House, 1970, 114 p. (In Russ)]

9. Tomin E.D, Mammaev ZM, Gumburg GV "Onekperience in construction of mole drainage systems in areas to be dewatered and irrigated" M., Publishing house "Mechanical engineering", "Construction and road machines", 1975. pp.22- 24.[Tomin E.D., Mammaev Z.M., Gumburg G.V. Experience in the construction of a closed drainage system on drained and irrigated lands. M., Publishing house "Mechanical engineering", "Construction and road machines", 1975. P.22-24.

10. Tomin Ye.D., Mammayev Z.M., Gumburg G.V. Opyt stroitel'stva zakrytogo drenazha na osushchayemykh i oroshayemykh zemlyakh. M., Izdatel'stvo «Mashinostroyeniye», «Stroitel'nyye i dorozhnyye mashiny», 1975. S.22-24.

11. Gasanov T.G., Magomedov G.M. K voprosu bor'by s puchinoobrazovaniyem na avtomobil'nykh dorogakh. Makhachkala: DGINKH, 2013. 154 s. [Gasanov T.G., Magomedov G.M. On the issue of combating heaving on highways. Makhachkala: DGINKH, 2013. 154 p. (In Russ)]

12. Vardanyan G.S., Andreyev V.I., Atarov N.M., Gorshkov A.A. Soprotivleniye materialov s osnovami teorii uprugosti i plastichnosti. M. Izdatel'stvo ASV, 1995. 568 s. [Vardanyan G.S., Andreev V.I., Atarov N.M., Gorshkov A.A. Resistance of materials with the fundamentals of the theory of elasticity and plasticity. M. Publishing house ASV, 1995568 p. (In Russ)]

13. Vasil'yev B.A., Gantman V.B., Komisarov V.V. i dr. Pod redaktsiyey N.N. Mera «Meliorativnyye mashiny». M., Kolos, 1980. [Vasiliev B.A., Gantman V.B., Komisarov V.V. and others. Edited by N.N. Measure "Reclamation machines". M., Kolos, 1980. (In Russ)]

14. Vardanyan G.S. Prikladnaya mekhanika: primeneniye metodov teorii podobiya i analiza razmernostey k modelirovaniyu zadach mekhaniki deformiruyemogo tverdogo tela, Uchebnoye posobiye, - M.: NITS INFRA-M, 2016. 174 s. [Vardanyan G.S. Applied mechanics: application of methods of the theory of similarity and analysis of dimensions to modeling problems of mechanics of a deformable rigid body, Textbook, M .: NITs INFRA-M, 2016. 174 p. (In Russ)]

15. Klimenko N.I. Solving problems on the stress state of anisotropic hollow cylinders rotating inhomogeneous in the circumferential direction. App. fur., Kiev, 1999, 35, No. 12, p. 56-62.

16. Gilayev G.V. Traktory i avtomobili s osnovami tekhnicheskoy mekhaniki: uchebnoye posobiye. MGUL, 2002. 347 s. 17. [Gilaev G.V. Tractors and cars with the basics of technical mechanics: a tutorial. MGUL, 2002. 347 p. (In Russ)]

17. Ryabenkov N.G. O vypolnenii usloviy svobodnoy granitsy tortsa svyazuyushchego v teorii sloistykh konstruktsii//Mater. 4-go Mezhdunar. Simpoziuma, Din.i tekhno. Problemy mekhaniki konstruk. i sploshnykh sred. Yaropolets, 16-18 fevr., 1998, M., 1998, s. 21-22. [ Ryabenkov N.G. On the fulfillment of the conditions for the free boundary of the end face of the binder in the theory of layered structures. 4th Int. Symposium, Din. And Techno. Structural mechanics problems. and continuous media. Yaropolets, 16-18 Feb., 1998, M., 1998, p. 21-22 (In Russ)]

18. Frishter L.YU., Savost'yanov V.N. O predstavlenii kusochno-odnorodnoy zadachi teorii uprugosti v vide summy odnorodnykh zadach, Voprosy matematiki, mekhaniki sploshnykh sred i primeneniya matematicheskikh metodov v stroitel'stve, Sb. nauchn. tr. MGSU, Moskva, 1999, s. 169-178. [Frishter L.Yu., Savostyanov V.N. On the representation of a piecewise-homogeneous problem of elasticity theory in the form of a sum of homogeneous problems, Problems of mathematics, mechanics of continuous media and the use of mathematical methods in construction, Collection of articles. scientific. tr. MGSU, Moscow, 1999, p. 169-178. (In Russ)]

19. Khesin G.L., Vardanyan G.S., Movila N.I. Modelirovaniye napryazhennogo sostoyaniya konstruktsiy iz raznomodul'nykh materialov na vyazkouprugikh modelyakh, Tr. in-ta, MISI, 1975, Vop. 125-126, s. 81-89. [Khesin G.L., Vardanyan G.S., Movila N.I. Modeling the Stress State of Structures Made of Multimodal Materials on Viscoelastic Models, Tr. Institute, MISS, 1975, Issue. 125-126, pp. 81-89. (In Russ)]

20. Shkelev L.T., Odinets E.A. An approximate method for solving a spatial problem of the theory of elasticity, Kievsk. nat. University of Building and Architect., Kiev, 1999, 8p., Dep. in the State Scientific and Technical Library of Ukraine on July 26, 1999, No. 212-UK. 99.

21. Andersen Thomas. Control system automatic. 1962, No. 4.

22. Ashida Fumihiro, Tauchert Theodore. Control of a distribution of transient thermoelalastic displacement in a composite circular disk, R.ISTAM, 2000, 20th, Intern. cong. of theor. and applied mechanics, Chicago, 27 Aug. 2 Sept., 2000, Abstr. Book. Urbana-Champaign (III), IUTAM, 2000, p.166.

23. Bossavit A. On the computation of strains and stresses in summetrical articulated structures, Exploit. Symmetry Appl. and Numer. Anal, AMS-SIAM Summer Semin, Appl. Math., Fort Collins. Colo, July 26-Aug. 1, 1992, Providence, 1993, pp. 111- 123.

24. Jain Rajeev, Ramachandra K., Simha K.R.Y. Rotating anisotropic disc of uniform strength, Int. J. Mech. Sci. 1999, 41, No. 6, pp. 639-648.