Methodological aspects of research into the stress-strain state of panel-frame vertical load-bearing systems

Aim. To analyse the possibilities of various computational methods (primarily numerical) in terms of investigating the stress-strain state of complex multi-dimensional vertical loadbearing systems. Methods. The fundamental essence of the finite-difference method (grids) and the finite element method is revealed, their advantages and disadvantages are described in terms of solving the plane problem of elasticity theory, in particular, in calculating the stress-strain state of panelframe structures united in a single vertical multi-connected system. Results. The obtained results can be used to optimize the methodology of theoretical stress-strain state analysis of complex multiconnected systems, taking into account available computer equipment and licensed software packages for automated calculation of building structures. Conclusion. The conducted analysis shows that, provided there is a sufficiently powerful computer, the finite element method is the most versatile and effective method. This method was the basis of a large number of software packages permitting analysis of the stress-strain state of any designs characterized by the complexity of form, topology, load, etc.

1. Magomedov M.G., Payzulayev M.M. Ispol'zovaniye metoda konechnykh elementov dlya teoreticheskogo modelirovaniya ploskikh betonnykh sistem // Nauchnoye obozreniye. - Moskva, 2015. №1, S. 77-81. [Magomedov M. G., Paizulaev M. M. Using the finite element method for theoretical modeling of flat concrete systems / / Scientific review. - Moscow, 2015. No. 1, рр. 77-81. (In Russ)]

2. Varvak P.M. Razvitiye i prilozheniye metoda setok k raschetu plastinok: nekotoryye zadachi prikladnoy teorii uprugosti v konechnykh raznostyakh / Chast' I. Izd. AN USSR, In-t stroitel'noy mekhaniki. -Kiyev, 1949.-136 s. [Varvak P. M. Development and application of the grid method to the calculation of plates: some problems of the applied theory of elasticity in finite differences / Part I. Ed. As of the Ukrainian SSR, In-t of construction mechanics. - Kiev, 1949. 136 p. (In Russ)]

3. Varvak P.M. Razvitiye i prilozheniye metoda setok k raschetu plastinok: nekotoryye zadachi pri-kladnoy teorii uprugosti v konechnykh raznostyakh / Chast' II. Izd. AN USSR, In-t stroitel'noy mekhaniki. -Kiyev, 1953.-115 s. [Varvak P. M. Development and application of the grid method to the calculation of plates: some problems of the applied theory of elasticity in finite differences / Part II. Ed. As of the Ukrainian SSR, In-t of construction mechanics. Kiev, 1953. 115 p. (In Russ)]

4. Dlugach M. I. mesh Method in a mixed plane problem of elasticity theory / Ed. An of the USSR, in-t mechanics. -Kiev: Naukova Dumka, 1964. 260 p.

5. Magomedov M.G. Napryazhennoye sostoyaniye i prochnost' balok-stenok v karkasno-panel'nykh zdaniyakh. Kand. diss. - M.: 1972. - 161 s. [Magomedov M. G. Stress state and strength of beams-walls in frame-panel buildings. Cand. Diss. - Moscow: 1972. 161 p. (In Russ)]

6. Clough R. U. finite element Method in solving the plane problem of elasticity theory / / Calculation of building structures using electronic machines, M.: 1967 (TRANS. from English. edited by A. F. Smirnov).

7. Courant R., Hilbert D. Methods of mathematical physics. In 2 vols. Vol. 1. Ed.3, Spanish 1951. 476 P.

8. Turner, M. I., Clough, R. W., Martin, H. C., and Topp, L. T., " Stiffness and Deflection Analysis of Complex Structures," Journal of the Aerospace Sciences, Vol. 25, No. 9, 1956, pp. 805-823.

9. Magomedov M.G., Akayev A. I., Mirzoyeva A. R. O variatsionnoy sushchnosti metoda konechnykh ele-mentov / Stroitel'stvo: problemy i perspektivy: sbornik statey po materialam II mezhdunarodnoy nauchno-prakticheskoy konferentsii. - Makhachkala: ALEF (IP Ovchinnikov M.A.), 2016. - S. 56-64. [Magomedov M. G., Akaev A. I., Mirzoeva A. R. on the variational essence of the finite element method / Construction: problems and prospects: collection of articles based on the materials of the II international scientific and practical conference. - Makhachkala: ALEF (IP Ovchinnikov MA), 2016. рр. 56-64. (In Russ)]

10. Argiris Dzh. Sovremennyye dostizheniya v metodakh rascheta konstruktsiy s primeneniyem matrits. M.: Stroyizdat, 1968. -241 s. (per. s angl. pod red. A.F. Smirnova). [Argyris George. Recent advances in methods of analysis of structures using matrices. Moscow: Stroizdat, 1968. -241 S. (translated from English. edited by A. F. Smirnov). (In Russ)]

11. Argiris Dzh. Energeticheskiye teoremy i raschet konstruktsiy. / Sovremennyye metody rascheta slozhnykh staticheski neopredelimykh sistem: sbornik statey. Leningrad: Sudpromgiz, 1961. -876 s. (Per. s angl. L. I. Filinoy). [Argyris George. Energy theorems and design calculations. / Modern methods for calculating complex statically indeterminate systems: a collection of articles. Leningrad: Sudpromgiz, 1961. -876 p. (Per.with English. L. I. Filina). (In Russ)]