modeling frame, flexible production system, search and selection algorithm, frame slot, graph diagram
https://doi.org/10.21822/2073-6185-2020-47-1-93-101
Abstract
Abstract. Aim. The aim of the study is to develop algorithmic support based on a frame model for information retrieval and selection of a flexible manufacturing system (FMS), as well as its technical units and control system in accordance with a process flow diagram.
Method. An intelligent method based on a frame model is used in order to create a search and selection algorithm. The FRL programming language was used for programming the frame model.
Results. In accordance with the published guidelines for ensuring the management and operation of archival design work, a comparative analysis of information support algorithms was carried out to in order to select flexible production systems (FPS) comprising standard elements, production modules, layout schemes and a set of information about their parameters or the location of documents. The model for creating algorithmic support was based on the modelling frame for the effective search and selection of the FMS, while its production modules and active elements were implemented in accordance with the scope of production and the purposes of each technical unit.
Conclusion. To ensure the reliable functioning of the FMS automatic control system, an algorithm is proposed for searching sensors based on frame slots and achievable positioning errors of industrial robots and technological equipment. An algorithm for locating sensors and controlling the active elements of an FMS production module is presented.
About the Authors
J. F. Mamedov
Sumgait State University
Azerbaijan
Azerbaijan
Dr. Sci.(Technical), Prof., Head of the Department
43 quarter, Sumgait AZ5008
K. S. Abdullaev
Sumgait State University
Azerbaijan
Azerbaijan
Cand. Sci.(Technical), Assoc. Prof., Head of the Department
43 quarter, Sumgait AZ5008
Z. M. Muradli
Sumgait State University
Azerbaijan
Azerbaijan
Graduate student
43 quarter, Sumgait AZ5008
E. M. Hasanova
Sumgait State University
Azerbaijan
Azerbaijan
Graduate student
43 quarter, Sumgait AZ5008
S. B. Alieva
Sumgait State University
Azerbaijan
Azerbaijan
Graduate student
43 quarter, Sumgait AZ5008
References
1. Alekseychuk A.Ye. i dr. Upravleniye znaniyami i sistemy avtomatizirovannogo proyektirovaniya. Materialy konferentsii i vystavki "Sistemy proyektirovaniya, tekhnologicheskoy podgotovki proizvodstva i upravleniya etapami zhiznennogo tsikla promyshlennogo produkta. CAD/CAM/PDM-2001". [Alekseychuk A.E. et al. Knowledge management and computer-aided design systems. Materials of the conference and exhibition "Design systems, technological preparation of production and life-cycle management of the industrial product. CAD / CAM / PDM-2001" (In Russ)]
2. Voronenko, V.P. Proyektirovaniye proizvodstvennykh sistem v mashinostroyenii: Ucheb. posobiye / V.P.Voronenko, YU.M.Solomentsev, A.G.Skhirtladze, A.I.Pul'bere. Tiraspol': RIO PGU, 2001. 349 s. [Voronenko, V.P. Design of production systems in mechanical engineering: Textbook. allowance / V.P. Voronenko, Yu.M. Solomentsev, A.G. Skhirtladze, A.I. Pulbere. Tiraspol: RIO PSU, 200. 349 p. (In Russ)]
3. [Zinchenko Yu.V., Goloborodko A.A. Overview of modern computer aided design systems. Omsk State Technical University, No. 4 (21), 2016, pp. 68-71. (In Russ)]
4. George F.L. Artificial Intelligence, Strategies, and Methods for Solving Complex Problems //New Mexico University, Williams. - M: St. Petersburg - Kiev, 2005 . 863 p.
5. Mel'nikov G.N., Voronenko V.P. Proyektirovaniye mekhanosborochnykh tsekhov. – M.: Mashinostroyeniye, 2010. – 352 s. [Melnikov G.N., Voronenko V.P. Design of mechanical assembly shops. M.: Mechanical Engineering, 2010. 352 p. (In Russ)]
6. Anzimirov L.V. Integrirovannaya SCADA i Softlogic sistema TRACE MODE5 2002 godu, №1, 2002, str. 15- 22. [Anzimirov L.V. Integrated SCADA and Softlogic System TRACE MODE5 2002, No. 1, 2002, pp. 15-22. (In Russ)]
7. Mamedov Dzh.F, Aliyev R.A., Akhmedov M.A. Razrabotka instrumentariya avtomatizirovannogo proyektiro-vaniya sistemy upravleniya GPS. -M.: Mekhatronika, Avtomatizatsiya, Upravleniye, №9, 2005, str. 27-35. [Mamedov J.F., Aliev R.A., Akhmedov M.A. Development of tools for computer-aided design of a GPS control system. -M.: Mechatronics, Automation, Management, No. 9, 2005, pp. 27-35. (In Russ)]
8. Mamedov J.F., Talybov N.G., Huseynova A.S. Issues of using a software package for choosing standard GPS equipment parts. Scientific notes of AzTU, Baku, XIII volume, No. 2, 2004, pp. 36-40.
9. Mamedov J.F., Huseynov A.H. Application of the intelligence and mathematical models for computing design of the flexible manufacturing module. Applied and computational mathematics, An International Journal, Volume 2, No. 1, 2003, p. 42-47.
10. Gero J.S. Expert systems in computer-aided design. - Elsevier Scrience Publishers B.V., North-Holland, Am-sterdam, 2007, p. 230-243.
11. George F.L. Artificial Intelligence, Strategies, and Methods for Solving Complex Problems // New Mexico University, Williams. - M: St. Petersburg - Kiev, 2005. 863 p.
12. Akhmadov M.A., Mamedov J.F. The option of flexible machining cell composes structure by means of minimization-branching time of industrial robot movement. The news of Azerbaijan Scientific Academy. Physic-technical and mathematical scientist, v. XXI, No.3, Baku - 2001, pp. 104-108.
13. Bruccoleri M., Sergio N. and Perrone G., “An object-oriented approach for flexible manufacturing controls sys-tems analysis and design using the unified modeling language”. Int. J. Flexible Manuf. Syst. 2003, No. 15 (3), pp. 195-216.
14. Kiryukhin V. M., Zaytsev K. S. Operatsionnoye upravleniye v gibkikh proizvodstvennykh sistemakh. M.: MIFI, 2006. — 92 s. [Kiryukhin V. M., Zaitsev K. S. Operational management in flexible production systems. M .: MEPhI, 2006. 92 p. (In Russ)]
15. El-Tamimi A. M., Abidi M.H., HammadMian S. and Aalam J. “Analysis of performance measures of flexible manufacturing system” Journal of King Saud University - Engineering Sciences 24, 2012, pp. 115-129.
16. Mamedov J.F., Huseynov A.H. Algorithmic and programmatic providing of the automated design of the flexible productive system // design Information technologies in planning and production. Scientific and technical magazine, Moscow. No. 1, 2011, pp. 49-52.
Review
For citations:
Mamedov J.F., Abdullaev K.S., Muradli Z.M., Hasanova E.M., Alieva S.B. modeling frame, flexible production system, search and selection algorithm, frame slot, graph diagram. Herald of Dagestan State Technical University. Technical Sciences. 2020;47(1):93-101. (In Russ.) https://doi.org/10.21822/2073-6185-2020-47-1-93-101
Views:
741
Email this article 
