EFFECT OF DOSAGE OF REDISPUTABLE POWDERS AND THE TYPE OF LOW-MODULAR INCLUSIONS ON THE PROPERTIES OF FINE-AGGREGATE CONCRETE
https://doi.org/10.21822/2073-6185-2019-46-2-167-175
Abstract
Objectives Reliability and durability of structures using materials with various properties (plaster coatings, cement glue, new concrete during repair and restoration of structures, etc.) largely depends on the adhesion of the layers and the deformation properties of the coatings. To obtain the required properties of materials used for coatings, modifiers based on polymers and low-modulus inclusions are introduced into the composition of new concretes, for example, entrained air. The aim of the work is to identify some patterns of change in the properties of concrete with the joint introduction of these modifiers.
Method Experimental determination of the tensile strength in bending, compression, E-modulus, adhesion to the concrete base by standard methods.
Result The influence of separate and joint introduction of dispersible polymer powders and various low-modulus inclusions into the composition of fine-grained concrete has been established.
Conclusion The joint introduction to the composition of fine-grained concrete of various low-modulus inclusions and redispersible polymer powders provides a reduction in the stress level during forced deformations due to the different effects additives on the strength and deformation properties and contributes to increased adhesion to the concrete.
About the Authors
A. V. Dolgova
Rostov State University of Communications
Russian Federation
Russian Federation
Senior Lecturer, of the Department «Surveys, design and construction of railways»,
344038, Rostov-on-Don, Rosto Rifle Regiment of the People's Militia sq., 2
G. V. Nesvetaev
Donskoy State Technical University
Russian Federation
Russian Federation
Dr. Sci. (Technical), Prof., Head of Department «Technology of construction production»,
344000, Rostov-on-Don, Gagarin sq., 1
References
1. Sukhiye smesi v sovremennom stroitel'stve / V.A. Bezborodov [i dr.] Novosibirsk, 1998. 94 s. [Dry mixes in modern construction / V.A. Bezborodov [et al.] - Novosibirsk, 1998. 94 p. (In Russ)]
2. Korneyev V.I., Zozulya P.V. Sukhiye stroitel'nyye smesi (sostav, svoystva): ucheb. posobiye – M.: RIF «Stroymaterialy», 2010. 320 s. [Korneev V.I., Zozulya P.V. Dry building mixtures (composition, properties): proc. allowance - M .: RIF "Building Materials", 2010. 320 p. (In Russ)]
3. Shamenskaya Ye.A., Orlova T.N. Plitochnyye sukhiye klei i sistemy // Stroitel'nyye materialy. 1999. №7-8. S. 14-16. [Shamenskaya E.A., Orlova T.N. Tiled dry adhesives and systems // Construction materials. 1999. № 7-8. pp. 14-16. (In Russ)]
4. Pukharenko YU.V., Kharitonov A.M., Shangina N.N., Safonova T.YU. Restavratsiya istoricheskikh ob"yektov s primeneniyem sovremennykh sukhikh stroitel'nykh smesey // Vestnik grazhdanskikh inzhenerov. 2011. №1(26), S. 98-103 [Puharenko Yu.V., Kharitonov, AM, Shangina, N.N., Safonova, T.Yu. Restoration of historical objects using modern dry building mixtures // Bulletin of civil engineers. 2011. №1 (26), pр. 98-103. (In Russ)]
5. Nesvetayev G.V., Uzhakhov M.A. Nekotoryye voprosy otsenki kachestva kleyev dlya plitki // ALITinform: Tsement. Beton. Sukhiye smesi. 2007. №1. S. 64-66. [ Nesvetaev G.V., Uzhakhov M.A. Some issues of quality assessment of tile adhesives // ALITinform: Cement. Concrete. Dry Mixes. №1. pp. 64-66. (In Russ)]
6. Tsyurbriggen R., Dil'ger P. Dispersionnyye polimernyye poroshki – osobennosti povedeniya v sukhikh stroitel'nykh smesyakh // Stroitel'nyye materialy. 1999. №3. S. 10-13. [Zyurbriggen R., Dilger P. Dispersion polymer powders - behavioral peculiarities in dry building mixtures. Stroitel'nye materialy, 2013, no. 1999. №3. Pp. 10-13. (In Russ)]
7. Zakhezin A.Ye., Chernykh T.N., Trofimov B.YA., Kramra L.YA. Vliyaniye redispergiruyemykh poroshkov na svoystva tsementnykh stroitel'nykh rastvorov // Stroitel'nyye materialy. 2004. №10. S. 6-8. [Zakhezin, A.E., Chernykh, TN, Trofimov, B.Ya., Kraram, L.Ya. The influence of redispersible powders on the properties of cement mortars // Construction materials. 2004. №10. pp. 6-8. (In Russ)]
8. Golunov S.A. Modifikatsiya plitochnykh kleyev redispersionnymi polimernymi poroshkami VIN-NAPAS // Stroitel'nyye materialy. 2004 . №3. S. 47-50. [ Golunov S.A. Modification of tile adhesives with redispersible polymeric powders VINNAPAS // Construction materials. 2004. No. 3. pp. 47-50. (In Russ)]
9. Babkov V.V., Mokhov V.N., Kapitonov S.M., Komokhov P.G. Strukturoobrazovaniye i razrusheniye tsementnykh betonov. Ufa, GUP «Ufimskiy poligrafkombinat», 2002. 376 s. [Babkov VV, Mokhov V.N., Kapitonov S.M., Komokhov P.G. Structure formation and destruction of cement concretes. Ufa, GUP Ufa Printing House, 2002. 376 p. (In Russ)]
10. Zimakova G.A. Zol'nyye mekhanoaktivirovannyye mikrosfery – komponent vysokoeffektivnykh be-tonov // Mezhdunarodnyy nauchno-issledovatel'skiy zhurnal. 2016. №12(54). S. 90-94. [Zimakova G.A. Ash mechanically activated microspheres - a component of high-performance concrete // International Scientific Research Journal. 2016. №12 (54). pp. 90-94. (In Russ)]
11. Batalin B.S. Issledovaniye effektivnosti dobavok, primenyayemykh dlya proizvodstva sukhikh stroi-tel'nykh smesey // Uspekhi sovremennogo yestestvoznaniya: Materialy konferentsii. 2007. №7. S. 71-73. [Batalin B.S. Study of the effectiveness of additives used for the production of dry building mixtures // Successes of modern natural science: Conference materials. 2007. №7. pp. 71-73. (In Russ)]
12. Nesvetayev G.V. Betony: uchebno-spravochnoye posobiye. 2-ye izd., pererab i dop. Rostov-na-Donu: Feniks, 2013. 381 s. [ Nesvetaev G.V. Concretes: a reference manual. 2nd ed., Pererab and add. Rostov-on-Don: Phoenix, 2013. 381 p. (In Russ)]
13. Nesvetayev G.V., Bazoyev O.K. Novaya seriya dobavok v beton proizvodstva NPP «Irstroyprogress» // Beton i zhelezobeton v tret'yem tysyacheletii: Materialy 4-y mezhd. konf. Rostov-na-Donu: RGSU, 2006. S. 319- 326. [Nesvetaev G.V., Bazoev О.K. New series of concrete additives produced by NPP Irstroyprogress // Concrete and reinforced concrete in the third millennium: Proceedings of the 4th int. conf. Rostov-on-Don: RSSU, 2006. pp. 319-326. (In Russ)]
14. Nesvetayev G.V. Primeneniye modifikatorov s tsel'yu upravleniya modulem uprugosti betona / Novyye nauchnyye napravleniya stroitel'nogo materialovedeniya: Akademicheskiye chteniya RAASN. – Belgo-rod, 2005. CH.2. S. 51-57. [ Nesvetaev G.V. The use of modifiers to control the modulus of elasticity of concrete / New scientific directions of building materials science: Academic readings of the RAACS. - Belgorod, 2005. Part 2. pp. 51-57. (In Russ)]
15. Bychkova O.A. Kley bystroy fiksatsii na osnove gipsoglinozemistogo rasshiryayushchegosya tsementa i portlandtsementa // «Inzhenernyy vestnik Dona» (elektronnyy nauchnyy zhurnal), 2018, № 3. ivdon.ru/ru/magazine/archive/n3y2018/5102 Bychkova O.A. Glue of fast fixing on the basis of gypsumaluminous expanding cement and portland cement // Don Engineering Newsletter (electronic scientific journal), 2018, No. 3. ivdon.ru/ru/magazine/archive/n3y2018/5102 (In Russ)] . Bychkova O.A. Bystrotverdeyushchiye styazhki na osnove gipsoglinozemistogo rasshiryayushchegosya tsementa i portlandtsementa // «Inzhenernyy vestnik Dona» (elektronnyy nauchnyy zhurnal), 2018, № 3. ivdon.ru/ru/magazine/archive/n3y2018/5103
16. [ Bychkova O.A. Quick-hardening screeds based on gypsum-alumina expanding cement and portland cement // Don Engineering Newsletter (electronic scientific journal), 2018, No. 3. ivdon.ru/ru/magazine/archive/n3y2018/5103(In Russ)]
17. Ohama Y. Handbook of polymer-modified concrete and mortars. Noyes Publications, Japan, 1995. 227 p. 18. Rajgelj S. Cohesion aspects in rheological behavior of fresh cement mortars // Mater. et constr. 1985. №104. pp 109-114.
Review
For citations:
Dolgova A.V., Nesvetaev G.V. EFFECT OF DOSAGE OF REDISPUTABLE POWDERS AND THE TYPE OF LOW-MODULAR INCLUSIONS ON THE PROPERTIES OF FINE-AGGREGATE CONCRETE. Herald of Dagestan State Technical University. Technical Sciences. 2019;46(2):167-175. (In Russ.) https://doi.org/10.21822/2073-6185-2019-46-2-167-175
Views:
648
Email this article 
