CALCULATION OF STRESSED-DEFORMED STATE OF THREE-LAYER PIPES OF SYMMETRIC AND ASYMMETRIC STRUCTURE
https://doi.org/10.21822/2073-6185-2019-46-2-126-135
Abstract
Objectives This article discusses the evaluation of the effectiveness of three-layer pipes of a symmetric and asymmetric structure. For this, the stress-strain state of three-layer pipes of different materials under the influence of internal pressure is investigated. Pipeline structures today occupy important positions in the infrastructures of many countries. Trunk structures affect the economy, industry. Every year, new safety requirements are added to the reliability indicators of these structures.
Method The calculation is carried out by numerical methods, namely using the finite element method (FEM), implemented in the LIRA PC.
Result The calculation of the pipes is performed, on the load from the transported medium, applied to the inner contour of the pipe. Moreover, for three-layer pipes of all variants, Nx tensile stresses along the generatrix, Ny ring tensile stresses and Txy shear stresses in the xy plane were determined. Isopoles of tensile and shear stresses are given.
Conclusion The numerical results showed that the use of less deforming material as a material for the manufacture of asymmetric bearing layers leads to a redistribution of stresses in the bearing layers and aggregate, and this must be taken into account when designing three-layer pipes.
Keywords
finite element method,
three-layer structures,
aggregate,
load-bearing layers,
symmetric and asymmetric structure
Supporting agencies: This work was supported by a grant from the President of the Russian Federation (MK-6112.2018.8).
About the Authors
M. S. Abakarov
Daghestan State Technical University
Russian Federation
Russian Federation
Deputy Head of the Office of the Federal Register for the Republic of Dagestan,
70 I. Shamil Ave., Makhachkala 367026
R. I. Vishtalov
Daghestan State Technical University
Russian Federation
Russian Federation
Cand. Sci. (Technical), Assoc. Prof., Department of Construction structures and hydraulic engineering structures,
70 I. Shamil Ave., Makhachkala 367026
H. M. Muselemov
Daghestan State Technical University
Russian Federation
Russian Federation
Cand. Sci. (Technical), Assoc. Prof., Department of Construction structures and hydraulic engineering structures,
70 I. Shamil Ave., Makhachkala 367026
O. M. Ustarkhanov
Daghestan State Technical University
Russian Federation
Russian Federation
Dr. Sci. (Technical), Prof., Department of Construction structures and hydraulic engineering structures,
70 I. Shamil Ave., Makhachkala 367026
References
1. Aynbinder A.B., Kamershteyn A.G. Raschet magistral'nykh truboprovodov na prochnost' i ustoychivost'. Spravochnoye posobiye. M.: Nedra, 1982. - 341 s. [Ainbinder A.B., Kamerstein A.G. Calculation of trunk pipelines for strength and stability. Reference manual. M .: Nedra, 1982. 341 p. (In Russ)]
2. Borodavkin P.P., Sinyukov A.M. Prochnost' magistral'nykh truboprovodov. M.: Nedra, 1984. 245 s. [Borodavkin P.P., Sinyukov A.M. Durability of trunk pipelines. M .: Nedra, 1984 245 p. (In Russ)]
3. Bulgakov A.I., Vishtalov R.I., Muselemov KH.M., Ustarkhanov O.M. Raschot trokhsloynykh trub bol'shogo diametra na PK «LIRA». Vestnik DGTU. Tekhnicheskiye nauki.-2018.-T45.-№2.-S.191-200. [Bulgakov A.I., Vishtalov R.I., Muselemov H.M., Ustarkhanov O.M. Calculation of three-layer pipes of large diameter on the PC "LIRA". Herald of the Daghestan State Technical University. Technical Sciences.. 2018. Vol.45. №2. pp.191-200. (In Russ)]
4. Aleksandrov A. YA. Kurshin L. M. Trekhsloynyye plastinki i obolochki. – V– kn.: Prochnost', ustoychivost', kolebaniya. M.: Mashinostroyeniye, 1968, t.2. [Aleksandrov A. Ya. Kurshin L. M. Three-layer plates and shells. - В– book .: Strength, stability, fluctuations. M .: Mechanical Engineering, 1968, Vol.2. (In Russ)]
5. Kobelev V.N., Kovarskiy L.M., Timofeyev S.I. Raschet trekhsloynykh konstruktsiy. M.: Mashinostroyeniye, 1984. [Kobelev V.N., Kovarsky L.M., Timofeev S.I. Calculation of three-layer structures. M .: Engineering, 1984. (In Russ)]
6. Gallager R. Metod konechnykh elementov. M.: 1984g, 424s. [Gallager R. The finite element method. M .: 1984, 424p. (In Russ)]
7. Gorodetskiy A.S., Yevzerov I.D. Komp'yuternyye modeli konstruktsiy. M.: Izdatel'stvo Assotsiatsii stroi-tel'nykh vuzov. 2009g, 360str. [Gorodetsky A.S., Evzerov I.D. Computer models of structures. M .: Publishing house of the Association of construction universities. 2009, 360 p. (In Russ)]
8. Rickards R.B. The finite element method in the theory of shells and plates. Riga: Zinatne, 1988, 284с.
9. Kvasov F.I., Fridlyander I.N. Promyshlennyye alyuminiyevyye splavy. M.: Metallurgiya, 1984 g. 528 s. [Kvasov F.I., Fridlyander I.N. Industrial aluminum alloys. M.: Metallurgy, 1984. 528 p. (In Russ)]
10. Ustarkhanov O.M., Bulgakov A.I., Gadzhiyev M.D. Sovershenstvovaniye modeley rascheta trekhsloynykh konstruktsiy// Tezisy dokladov XXII nauchno-tekhnicheskoy konferentsii prepodavateley, sotrudnikov, aspirantov i studentov DGTU. Makhachkala, 1999. S.52-54. [ Ustarkhanov O.M., Bulgakov A.I., Gadzhiev M.D. Improving the models for calculating three-layer structures // Abstracts of the XXII scientific and technical conference of teachers, employees, graduate students and students of DSTU. Makhachkala, 1999.S. 52-54. (In Russ)]
11. Pelekh B.L., Laz'ko V.A. Sloistyye anizotropnyye plastiny i obolochki s kontsentratami napryazheniy. Kiyev: Nauk. Dumka, 1982,295 s. [Pelekh B.L., Lazko V.A. Layered anisotropic plates and shells with stress concentrates. Kiev: Science. Dumka, 1982.295 p. (In Russ)]
12. Mikhlin S.G. Variatsionnyye metody matematicheskoy fiziki. M.: Nauka. 1990, 512s. [Mikhlin S.G. Variational methods of mathematical physics. M .: Science. 1990, 512p. (In Russ)]
13. Paymushin V.N., Mushtari A.I. Utochnennaya teoriya ustoychivosti trekhsloynykh obolochek s transversal'nozhestkim zapolnitelem. 3. Prosteyshiye odnomernyye zadachi. Mekhanika kompozitnykh materialov. -Riga: Zinatne. - 1998, t.34, №1. - s.57-65. [Paimushin V.N., Mushtari A.I. A refined theory of the stability of three-layer shells with a transversely rigid aggregate. 3. The simplest one-dimensional problems. The mechanics of composite materials. -Riga: Zinatne. 1998, Vol. 34, No.1. pp. 57-65. (In Russ)]
14. Panin V.F., Gladkov YU.A. Konstruktsii s zapolnitelem: Spravochnik. M.: Mashinostroyeniye, 1991. 271s. [Panin V.F., Gladkov Yu.A. Constructions with a placeholder: Reference. M .: Engineering, 1991.271p. (In Russ)]
15. Poletayev V.V., Popugayev V.I., Korol' B.A. Primeneniye teplozashchitnykh legkikh betonov v mnogosloynykh ograzhdayushchikh konstruktsiyakh // Nauch. tr. M.: MGUL, 1988. Vol. 204. pp. 102 - 107. [Poletaev V.V., Popugaev V.I., King B.A. The use of heat-protective lightweight concrete in multilayer walling // Scientific. tr M .: MGUL, 1988. Issue. 204. pp. 102 - 107. (In Russ)]
16. Ustarkhanov O.M. «Voprosy prochnosti trekhsloynykh konstruktsiy s regulyarnym diskretnym zapolnite-lem»: Diss. d−ra tekhn nauk. Rostov-na-Donu. 2000. [ Ustarkhanov O.M. “Strength Issues of Three-Layer Structures with Regular Discrete Fill”: Diss. Doctor of Technical Sciences. Rostov-on-Don. 2000. (In Russ)]
17. Zaprudnov V.I. Derevyannyye trekhsloynyye paneli s teploizolyatsionnymi materialami na osnove dre-vesnykh otkhodov. Razvitiye derevyannogo domostroyeniya v Rossii: Materialy Mezhdunarodnoy konferentsii. Sankt-Peterburg, 5-6 marta 2000 g. SPb., SPbGLTA, 2001. - S. 79. [Zaprudnov V.I. Wooden three-layer panels with heat-insulating materials based on wood waste. The development of wooden housing in Russia: Materials of the International Conference. St. Petersburg, March 5-6, 2000. St. Petersburg., St. Petersburg State Technical Academy, 2001. р.79. (In Russ)]
Review
For citations:
Abakarov M.S., Vishtalov R.I., Muselemov H.M., Ustarkhanov O.M. CALCULATION OF STRESSED-DEFORMED STATE OF THREE-LAYER PIPES OF SYMMETRIC AND ASYMMETRIC STRUCTURE. Herald of Dagestan State Technical University. Technical Sciences. 2019;46(2):126-135. (In Russ.) https://doi.org/10.21822/2073-6185-2019-46-2-126-135
Views:
614
Email this article 
