RATIONING ASSEMBLY-MOUNTING WORKS AT THE DEVELOPING ELECTRONIC EQUIPMENT FOR NUCLEAR POWER PLANTS
https://doi.org/10.21822/2073-6185-2019-46-2-89-97
Abstract
Objectives The aim of the study is to simulate assembly and installation work when creating equipment for nuclear power plants based on radio electronics
Method The study is based on methods of mathematical modeling of technological processes.
Result This work is the structuring of knowledge on the assembly and installation of electronic equipment for nuclear power plants. Known methods for the production of printed circuit boards are described. Since the application of solder paste is one of the most responsible technological methods, to minimize the occurrence of defective prints, it is necessary to precisely select the components and make the appropriate chemical composition. For the model of the “Entry-Exit” system, the parameters of the input and disturbing array are shown.
Conclusion Taking into account the parametric dependences and the effect of fatigue during sequential operation, an equation is obtained that allows, as a first approximation, to normalize assembly and installation works. Mounted mounting is not taken into account in the equation, as This process is more rational to carry out during the direct assembly of equipment or its components.
About the Author
I. A. LoskutovRussian Federation
design engineer, 30 Volnaya Str., p. 10, Moscow 107078;
19 Zoe and Alexandra Kosmodemyanskikh Str., Moscow 125130;
teacher, graduate student, 78 Vernadsky Ave., Moscow 119454
References
1. Valetov V.A. Osnovy proizvodstva radioelektronnoy apparatury / V.A. Valetov – SPb.: SPbGU ITMO, 2007, 112s. [Valetov V.A. Bases of production of the radio-electronic equipment / V.A. Valetov– SPb.: SPbSU ITMO, 2007, 112p. (In Russ)]
2. Korotkova Ye.I. Osnovy konstruirovaniya i tekhnologii proizvodstva RES / Ye.I. Korotkova – Yaroslavl', YarGU, 2013, 192s. [Korotkova E.I. design principles and technologies for the production of RES / E.I. Korotkova – Yaroslavl, Yaroslavl state University, 2013, 192p. (In Russ)]
3. Medvedev A.M. Pechatnyye platy. Konstruktsii i materialy / A.M. Medvedev – M.: Tekhnosfera, 2005, 302s. [Medvedev A.M. of the PCB. Designs and materials / A.M. Medvedev – M.: Technosphere, 2005, 302p. (In Russ)]
4. Tupik V.A. Tekhnologiya i organizatsiya proizvodstva radioelektronnoy apparatury – SPb.: SPbGETU «LETI», 2005, 147s. [Tupik V.A. Technology and organization of production of electronic equipment / V.A. Tupik – SPb.: SPbGETU "LETI", 2005, 147p. (In Russ)]
5. Hanke H.-J., Fabian H. Technologie elektronischer Baugruppen / H.-J. Hanke, H. Fabian – Berlin: Verlag Technik, 1975, 542p.
6. Loskutov I. A. Opredeleniye normy rabochego vremeni sborki karkasa silovogo i / ili upravlyayushchego, vklyuchaya radioelektronnoye oborudovaniye na predpriyatiyakh, zanimayushchikhsya razrabotkoy izdeliy dlya AES // Zhurnal issledovaniy po upravleniyu. 2018. №.6. S.29-42. URL:https://naukaru.ru/ru/nauka/article/21002/view [Loskutov I.A. Definition of standard working time of assembly of the frame power and / or control, including radioelectronic equipment at the enterprises involved in the development of products for NPPs / I.A. Loskutov // Journal of Management Studies. 2018. no.6. pp. 29-42. URL:https://naukaru.ru/en/nauka/article/21002/view (In Russ)]
7. Loskutov I.A. Opredeleniye normy rabochego vremeni sborki karkasa silovogo i / ili upravlyayushchego, vklyuchaya radioelektronnoye oborudovaniya na predpriyatiyakh, zanimayushchikhsya razrabotkoy izdeliy dlya AES. Vtoroye priblizheniye / I.A. Loskutov // Vestnik KemRIPK – Kemerovo, 2018, T.2. s.12-19 URL: https://yadi.sk/i/amUic6FU3Yi363 [Loskutov I.A Definition of standard working time of assembly of the frame power and / or control, including radioelectronic equipment at the enterprises involved in the development of products for NPPs. second approximation / I.A. Loskutov // Bulletin of KemRIPK – Kemerovo, 2018, V.2. p.12-19 URL: https://yadi.sk/i/amUic6FU3Yi363 (In Russ)]
8. Loskutov I. A. Opredeleniye normirovannogo vremeni sborki ustroystv dlya AES s uchetom vremennykh osobennostey rabochikh smen / I.A. Loskutov // Zhurnal issledovaniy po upravleniyu. 2018. №.8. S.24-32. URL: https://naukaru.ru/ru/nauka/article/22688/view [Loskutov I.A. Determination of the normalized assembly time for devices for NPPs, taking into account the temporary features of work shifts / I.A. Loskutov // Journal of Management Studies . 2018. no. 8. pp. 24-32. URL: https://naukaru.ru/en/nauka/article/22688/view ( In Russ)]
9. Loskutov I.A. Uchet obnuleniya ustalosti v uravnenii normirovaniya vremeni sborki kar-kasa oborudovaniya dlya AES / I.A. Loskutov // Innovatsionnyye, informatsionnyye i kommunikatsionnyye tekhnologii: sbornik trudov XV Mezhdunarodnoy nauchno-prakticheskoy konferentsii. / pod.red. S.U. Uvay-sova – M.: Assotsiatsiya vypusknikov i sotrudnikov VVIA im. prof. Zhukovskogo, 2018, c.445-450 [Loskutov I.A. Accounting of zero fatigue in the equation of normalizing the time of Assembly of the frame of equipment for nuclear power plants / I.A. Loskutov // Innovative, information and communication technologies: proceedings of the XV International scientific and practical conference. / under edited by S.W. Uvaisov – M.: Association of alumni and staff vvia im. prof. Zhukovsky, 2018, c.445-450 (In Russ)]
10. Loskutov I.A. Vybor tipa upravleniya na proizvodstve, zanimayushchegosya razrabotkoy obo-rudovaniya v oblasti mirnogo atoma / I.A. Loskutov // Vestnik KemRIPK – Kemerovo, 2018, T.3. s.18-26 URL: kemripk.ru/f/vestnik_2018_3.pdf. [Loskutov I.A. Selection of management type on production developed by the development of equipment for a peaceful ATOM / I.A. Loskutov // Bulletin of KemRIPK – Kemerovo, 2018, vol.3. p. 18-26 URL: kemripk.ru/f/vestnik_2018_3.pdf (In Russ)]
11. Loskutov I.A. Causes for produced production of equipment for nuclear power plants / I.A. Loskutov // Information Innovative Technologies: Materials of the International scientific – practical conference – Prague, 2018, p. 11. 392-396
12. Loskutov I.A. Osobennosti sborki radioelektronnogo oborudovaniya na predpriyatiyakh, ra-botayushchikh v atomnoy sfere / I.A. Loskutov // Vestnik KemRIPK – Kemerovo, 2018, T.3. s.26-31 URL: kemripk.ru/f/vestnik_2018_3.pdf [Loskutov I.A. Peculiarities of assembly of radioelectronic equipment at the enterprises working in the nuclear sector / I.A. Loskutov // Bulletin of KemRIPK – Kemerovo, 2018, vol.3. p. 26-31 URL: kemripk.ru/f/vestnik_2018_3.pdf (In Russ)]
13. Trentelman H. L., Stoorvogel A. A., Malo H. Control theory for linear systems / H.L. Trentelman, A.A. Stoorvogel, H. Malo – Berlin, Springer, ISBN 978-1-4471-0339-4, 2001, 389p.
14. GOST 23752-79. Platy pechatnyye. Obshchiye tekhnicheskiye usloviya (s Izmeneniyami N1-5) [GOST 23752-79. Printed circuit boards. General specifications (as Amended by N1-5) (In Russ)]
15. GOST R 53429-2009. Platy pechatnyye. Osnovnyye parametry konstruktsii [GOST R 53429-2009. Printed circuit boards. Basic parameters of structure(In Russ)]
16. OST 11 073.062-2001. Mikroskhemy integral'nyye i pribory poluprovodnikovyye. Trebova-niya i metody zashchity ot staticheskogo elektrichestva pri razrabotke i primenenii [OST 11 073.062-2001. Integrated circuits and semiconductor devices. Requirements and methods of protection against static electricity in the development and application(In Russ)]
17. GOST R 55491-2013. Platy pechatnyye Pravila vosstanovleniya i remonta [GOST R 55491-2013. Printed circuit boards. Rework, modification and repair of electronic assemblies. (In Russ)]
18. Krylov V.P. Tekhnologii i podgotovka proizvodstva pechatnykh plat. Uchebnoye posobiye / V.P. Krylov – Vladimir: VlGU, 2006, 64s. [Krylov V.P. of Technology and preparation for the production of printed circuit boards. Tutorial / V.P. Krylov – Vladimir: Vladimir state University, 2006, 64p. (In Russ)]
19. GOST 2.109-73. Yedinaya sistema konstruktorskoy dokumentatsii (YESKD). Osnovnyye trebo-vaniya k chertezham [GOST 2.109-73. Unified system for design documentation. Basic requirements for drawings(In Russ)]
20. STO OAYU.624.002-2007. Sistema menedzhmenta kachestva. Sborochnyye yedinitsy radioelek-tronnoy apparatury s primeneniyem izdeliy elektronnoy tekhniki, montiruyemykh na poverkhnost' pechatnykh plat // FGUP NIIEM, Istra, 4.05.2007, 43s. [STO OAU.624.002-2007. Quality management system. Assembly units of electronic equipment with the use of electronic products mounted on the surface of printed circuit boards // FSUE NIIEM, Istra, 4.05.2007, 43p. (In Russ)]
21. OST 45.010.030-92. Elektronnyye moduli pervogo urovnya RES. Ustanovka izdeliy elek-tronnoy tekhniki na pechatnyye platy. Tekhnicheskiye trebovaniya. Konstruktsiya i razmery [OST 45.010.030-92. Electronic modules of the first level of RES. Installation of electronic products on printed circuit boards. Specifications. Design and dimensions(In Russ)]
22. OST 16 0.684.032-92. Montazh elektricheskiy vnutrenniy elektrotekhnicheskikh izdeliy. Obshchiye tekhnicheskiye trebovaniya [OST 16 0.684.032-92. Installation of electrical internal electrical products. General technical requirements(In Russ)]
23. OST 4G 0.054.267 Apparatura radioelektronnaya. Sborochno-montazhnoye proizvodstvo. Payka elektromontazhnykh soyedineniy. Tipovyye tekhnologicheskiye operatsii. (Red.1-80) [OST 4G 0.054.267 radio-electronic Equipment. Assembly and Assembly production. Soldering of electrical connections. Typical technological operations. (Ed.1-80) (In Russ)]
24. OST 11 073.062-2001. Mikroskhemy integral'nyye i pribory poluprovodnikovyye. Trebova-niya i metody zashchity ot staticheskogo elektrichestva pri razrabotke, proizvodstve i primenenii. [OST 11 073.062-2001. Integrated circuits and semiconductor devices. Requirements and methods of protection against static electricity in the development, production and application(In Russ)]
Review
For citations:
Loskutov I.A. RATIONING ASSEMBLY-MOUNTING WORKS AT THE DEVELOPING ELECTRONIC EQUIPMENT FOR NUCLEAR POWER PLANTS. Herald of Dagestan State Technical University. Technical Sciences. 2019;46(2):89-97. (In Russ.) https://doi.org/10.21822/2073-6185-2019-46-2-89-97