MODELING OF THE PROCESS OF CUTTING MINERAL GROUNDS BY PASSIVE WORKING DRAWNER DURING THE CONSTRUCTION OF CLOSED DRAINAGE

Objectives. The article describes an electronic model of the soil to study its rheological properties and study the process of cutting passive working bodies (knives) of mineral soils with trench-less method of building a closed drainage.

Method. The essence of the method consists in cutting through the ground with the help of a passive working body of a narrow slit under a given slope and simultaneously laying a drainage (usually plastic) pipe with a filter on its bottom.

Result. The trenchless method is characterized by the possibility of laying pipes at high speeds, the simplicity of the design of drainage machines and, most importantly, the possibility of building drainage in water-saturated and collapsing mineral soils. A big advantage is the possibility of using a drainage machine with a trenchless method in conditions of small slopes with a sufficient length of stacked drains.

Conclusion. The study of the process of cutting mineral soils with narrow, deep knives on an electronic model makes it possible, at the design stage, to evaluate the effect of changes in various factors and parameters on the operating modes of the drainage machine; if necessary, make changes to the complex of works on the construction of drainage using the trenchless method with the help of the BDM-300 bed-draining machine, as well as to determine the composition and duration of the work operations of the trench-free bed-draining machine.

1. Maslov B.S. Puti sovershenstvovaniya osushitel'nykh sistem. Trudy VNIIGiM im.A.N. Kostya-kova. Tom.52, Moskva, 1972. – S.5-21. [Maslov B.S. Ways to improve drainage systems. Proceedings of the VNIIGiM im.AN. Kostya-kova. Vol.52, Moscow, 1972. - P.5-21. (In Russ)]

2. Tomin Ye.D. Mekhanizatsiya stroitel'stva zakrytogo drenazha. Moskva, Izdatel'stvo «Kolos», «Khlopkovodstvo», 1978. - S.36-40. [Tomin E.D. Mechanization of the construction of closed drainage. Moscow, Kolos Publishing House, "Cotton Plant", 1978. - P.36-40. (In Russ)]

3. Gasanov T.G. Ustroystvo termicheskogo krotovogo drenazha. Moskva, Izdatel'stvo «Kolos», «Khlopkovodstvo», 1978. - S.40-41. [Gasanov T.G. Thermal mole drain device. Moscow, Kolos Publishing House, "Cotton Plant", 1978. - P.40-41. (In Russ)]

4. Gasanov T.G. Prokladka krotovogo drenazha s termicheski zakreplennymi stenkami. Moskva, Iz-datel'stvo «Ko-los», «Mekh. i elektr.sots. sel's. khozyaystva», 1978. - S.24-26. [Gasanov T.G. Lining of mole drainage with ther-mally fixed walls. Moscow, Kolos Publishing House, “Fur. and elektr.sots. sels economy, 1978. - P.24-26. (In Russ)]

5. Beylin D.KH. Mekhanizatsiya drenazhnykh rabot. Perspektivy mekhanizatsii stroitel'stva drenazha. Moskva, Iz-datel'stvo «Kolos», 1975, 256 s. [Beilin D.H. Mechanization of drainage works. Prospects for the mechanization of the construction of drainage. Moscow, Kolos Publishing House, 1975, 256 p. (In Russ)]

6. Tomin Ye.D., Kazakov V.S. Opyt stroitel'stva, ekspluatatsii i remonta zakrytogo drenazha na osushayemykh zem-lyakh. Moskva, Izdatel'stvo «Kolos», 1970, 114 s. [Tomin E.D., Kazakov V.S. Experience in the construction, operation and maintenance of closed drainage on drained lands. Moscow, Kolos Publishing House, 1970, 114 p. (In Russ)]

7. Tomin Ye.D., Mammayev Z.M., Gumburg G.V. Opyt stroitel'stva zakrytogo drenazha na osushchayemykh i oroshayemykh zemlyakh. M., Izdatel'stvo «Mashinostroyeniye», «Stroitel'nyye i dorozhnyye mashiny», 1975. - S.22-24. [Tomin E.D., Mammaev Z.M., Humburg G.V. Experience in the construction of closed drainage on drained and irrigated land. M., “Mashinostroenie”, “Construction and Road Machines” Publishing House, 1975. - P.22-24. (In Russ)]

8. Tomin E.D, Mammaev Z.M, Gumburg G.V «Onekperience in construction of mole drainage systems in areas to be dewatered and irrigated» M., Publishing house "Mechanical engineering", "Construction and road ma-chines", 1975. - P.22-24. [Tomin E.D, Mammaev Z.M, Gumburg G.V "Mechanical engineering", "Construction and road ma-chines", 1975. - P. 22-24. (In Russ)]

9. Gasanov T.G., Magomedov G.M. K voprosu bor'by s puchinoobrazovaniyem na avtomobil'nykh doro-gakh. Ma-khachkala: DGINKH, 2013. – 154 s. [Gasanov T.G., Magomedov G.M. On the issue of combating heap formation on highways. Makhachkala: DGINH, 2013. - 154 p. (In Russ)]

10. Agakhanov E.K., Agakhanov G.E. Matematicheskoye modelirovaniye vozdeystviya porovogo davleniya na skelet grunta. Stroitel'stvo: problemy i perspektivy: sbornik statey po materialam mezhdunarodnoy nauchno-praktich-eskoy konferentsii, 29-30 marta 2013 g. Makhachkala: DGINKH, 2013. – 154 s. [Agakhanov, E.K., Agakhanov, G.E. Mathematical modeling of the pore pressure effect on the soil skeleton. Construction: problems and prospects: a collection of articles on the materials of the international scientific-practical conference, March 29-30, 2013. Makhachkala: DGINH, 2013. - 154 p(In Russ)].

11. Vardanyan G.S., Andreyev V.I., Atarov N.M., Gorshkov A.A. Soprotivleniye materialov s osnovami teorii upru-gosti i plastichnosti. M. Izdatel'stvo ASV, 1995.- 568 s. [Vardanyan G.S., Andreev V.I., Atarov N.M., Gorshkov A.A. Resistance of materials with the fundamentals of the theory of elasticity and plasticity. M. Publishing House DIA, 1995.- 568 p. (In Russ)]

12. Chernyy G.I., Smirnov A.G. Osnovy dinamiki gruntov i yeye prakticheskoye prilozheniye. «Naukova dumka», 1968. [Cherny G.I., Smirnov A.G. Fundamentals of soil dynamics and its practical application. "Naukova Dumka", 1968. (In Russ)]

13. Agakhanov E.K., Magomedeminov N.S. Radzhabov R.G. Modelirovaniye napryazheniy v kompozitnom izdelii standartnym opticheski chuvstvitel'nym materialom. Vestnik Dagestanskogo gosudarstvennogo tekhnicheskogo universiteta. Tekhnicheskiye nauki. 2017; 44(4):8-18. [Agakhanov E.K., Magomedeminov N.S. Radjabov R.G. Stress modeling in a composite product with a standard optically sensitive material. Bulletin of the Dagestan State Technical University. Technical science. 2017; 44 (4): 8-18. (In Russ)]

14. Vardanyan G.S. Prikladnaya mekhanika: primeneniye metodov teorii podobiya i analiza razmerno-stey k mod-elirovaniyu zadach mekhaniki deformiruyemogo tverdogo tela, Uchebnoye posobiye, - M.: NITS IN-FRA-M, 2016. - 174 s. [Vardanyan G.S. Applied mechanics: the application of the methods of the theory of similarity and analysis of dimensions to the modeling of the problems of the mechanics of a deformable solid body, Textbook, - Moscow: INITRA-M, 2016. - 174 p. (In Russ)]

15. Klimenko N.I. Resheniye zadach o napryazhennom sostoyanii vrashchayushchikhsya neodnorodnykh v okruzh-nom napravlenii anizotropnykh polykh tsilindrov. Prikl. mekh., Kiyev, 1999, 35, №12, s. 56-62. [Klimenko N.I.

16. Solving problems on the stressed state of rotating anisotropic hollow cylinders inhomogeneous in the circumfer-ential direction. Attach fur., Kiev, 1999, 35, №12, pp. 56-62. (In Russ)]

17. Preyss A.K., Granenko F.A. Primeneniye metoda «zamorazhivaniya» k opredeleniyu napryazheniy na vrashchayushchikhsya modelyakh, Polyarizatsionno-opticheskiy metod issledovaniya napryazheniy, Pod red. N. I. Prigorovskogo, M., 1956, s. 271-279. [Preiss, A.K., Granenko, F.A. Application of the method of "freezing" to the determination of stresses on rotating models, Polarization-optical method for studying stresses, Ed. N. I. Prigo-rovskogo, M., 1956, pp. 271-279. (In Russ)]

18. Ryabenkov N.G. O vypolnenii usloviy svobodnoy granitsy tortsa svyazuyushchego v teorii sloistykh konstruktsii//Mater. 4-go Mezhdunar. Simpoziuma, Din.i tekhno. Problemy mekhaniki konstruk. i sploshnykh sred. Yaropolets, 16-18 fevr., 1998, M., 1998, s. 21-22. [Ryabenkov N.G. On the fulfillment of the conditions of the free boundary of the end face of the binder in the theory of layered structures // Mater. 4th Intern. Symposium, Din.i techno. Mechanical design problems. and continuous media. Yaropolets, Feb. 16-18, 1998, M., 1998, pp. 21-22. (In Russ)]

19. Frishter L.YU., Savost'yanov V.N. O predstavlenii kusochno-odnorodnoy zadachi teorii uprugo-sti v vide summy odnorodnykh zadach, Voprosy matematiki, mekhaniki sploshnykh sred i primeneniya matema-ticheskikh metodov v stroitel'stve, Sb. nauchn. tr. MGSU, Moskva, 1999, s. 169-178. [Frishter L.Yu., Savostyanov V.N. On the repre-sentation of the piecewise-homogeneous problem of the theory of elasticity as a sum of homogeneous problems, Mathematical problems, continuum mechanics and the application of mathematical methods in construction, Coll. scientific tr. MGSU, Moscow, 1999, pp. 169-178. (In Russ)]

20. Khesin G.L., Vardanyan G.S., Movila N.I. Modelirovaniye napryazhennogo sostoyaniya konstruktsiy iz raznomodul'nykh materialov na vyazkouprugikh modelyakh, Tr. in-ta, MISI, 1975, Vyp. 125-126, s. 81-89. [Khesin G.L., Vardanyan G.S., Movila N.I. Simulation of the stress state of structures from multi-modular materi-als on viscoelastic models, Tr. Inst., IISS, 1975, Vol. 125-126, pp. 81-89. (In Russ)]

21. Shkelev L.T., Odinets Ye.A. Priblizhennyy metod resheniya prostranstvennoy zadachi teorii uprugosti, Kiyevsk. nats. Un-t str-va i arkhit., Kiyev, 1999, 8s., Dep. v GNTB Ukrainy 26.07.99, №212-Uk. 99.

22. [Shkelev L.T., Odinets E.A. An approximate method for solving the spatial problem of the theory of elasticity, Kiev. nat University of Construction and Architect., Kiev, 1999, 8c., Dep. at the State Scientific and Technical Library of Ukraine on July 26, 1999, No. 212-Uk. 99(In Russ)]

23. Andersen Thomas. Control system automatic. 1962, №4.

24. AshidaFumihiro, Tauchert Theodore. Control of a distribution of transient thermoelalastic displacement in a com-posite circular disk, R.ISTAM, 2000, 20th, Intern. cong. of theor. and applied mechanics, Chicago, 27 Aug.2Sept., 2000, Abstr. Book. Urbana-Champaign (III), IUTAM, 2000, p. 166.

25. Bossavit A. On the computation of strains and stresses in summetrical articulated structures, Exploit. Symmetry Appl. and Numer.Anal, AMS-SIAM Summer Semin, Appl. Math., Fort Collins. Colo, July 26-Aug. 1, 1992, Prov-idence, 1993, pp. 111-123.

26. Jain Rajeev, Ramachandra K., Simha K.R.Y. Rotating anisotropic disc of uniform strength, Int. J. Mech., Sci., 1999, 41, №6, pp. 639-648.