INFLUENCE OF THE METERING METHOD ON THE CHARACTERISTICS OF A DIESEL DISTRIBUTOR FUEL PUMP
https://doi.org/10.21822/2073-6185-2018-45-2-52-61
Abstract
Objectives The aim of the study is to improve the performance of the metering system and thus enhance control over the cyclical supply of fuel to a diesel distributor pump. The results of a study of the effect of a new metering method on the characteristics of a distributor fuel pump are presented.
Methods Following mathematical analysis, a mathematical model of the working process of the fuel supply system, based on a new metering approach employing the "decay of discontinuity" method, was compiled.The model comprises a system of differential equations for continuity and momentum alongside mass balance equations for describing the boundary conditions for various cavities of the fuel system, i.e. above the plunger, under the valve, above the valve cavities and in the nozzle. The differential equations take into account the two-phase nature of the gas-liquid medium in the injection cavities and metering system, as well as the design features of the pump. An expression for the stroke of the metering plunger in the new system is given.
Results The theoretical and experimental characteristics of a fuel supply system employing the proposed metering system are considered. Diagrams showing maximum injection pressures, which depend on the stroke of the metering plunger at various strokes of the injection plunger and alteration of maximum injection pressure of the nozzle depending on the rotation speed of the cam shaft, are provided. The characteristics of the fuel supply system of the pump for various spring stiffness of the metering plunger are also provided in diagram form. The comparative parameters of the fuel supply process are presented for the conventional and new metering methods. The features of the use of diesel high-pressure distributor pumps, their design and operational features are described. The advantages of the metering system proposed by the author are presented in terms of its influence on the fuel injection process. A comparative evaluation of metering methods used in contemporary distributor pumps for diesel engines is given.
Conclusion The results of the experiments confirmed the suitability of the new metering method for use in diesel engines.
About the Author
К. M. Godzhaev
Azerbaijan Technical University
Azerbaijan
Azerbaijan
25 Hussein Javid Ave., Baku 370073
Kurban M. oglu Gojayev – Senior Lecturer, Department of Automotive Technology
References
1. Kerimov Z.Kh., Godzhaev K. M. Evraziiskii patent № 014848 “Sposob upravleniya tsiklovoi podachei toplivnogo nasosa vysokogo davleniya i ustroistvo dlya ego osushchestvleniya” [Kerimov Z.Kh., Godzhaev K. M. Eurasian patent No. 014848 “Method for controlling the cyclic supply of a highpressure fuel pump and the device for its implementation” (in Russ.)]
2. Kerimov Z.Kh. Nekotorye rezul'taty matematicheskogo modelirovaniya volnovykh protsessov v dvukhfaznoi srede v dizel'noi toplivovpryskivayushchei sisteme. Dvigateli vnutrennego sgoraniya. 2004;1:20-24. [Kerimov Z.Kh. Some results of mathematical modeling of wave processes in a twophase medium in a diesel fuel-injection system. Internal combustion engines. 2004;1:20-24. (in Russ.)]
3. Kerimov Z.Kh. Matematicheskoe modelirovanie i issledovanie gidrogazodinamicheskikh protsessov v dizel'nykh dvigatelyakh. Dissertatsiya na soiskanie uchenoi stepeni d.t.n. Baku; 2007. 432 s. [Kerimov Z.Kh. Mathematical modeling and investigation of hydro-gas dynamic processes in diesel engines. Doctor of technical sciences thesis. Baku; 2007. 432 p. (in Russ.)]
4. Godzhaev K.M. Vliyanie novogo doziruyushchego metoda na toplivovpryskivayushchii protsess v dizel'nykh raspredelitel'nykh nasosakh vysokogo davleniya. Materialy Respublikanskogo NauchnoTekhnicheskogo Konfransa, po teme perspektivy razvitiya transportno-dorozhnogo kompleksa Azerbaidzhanskoi Respubliki. Baku; 2017. C.42-45. [Godzhaev K.M. The effect of the new metering method on the fuel-injection process in high-pressure diesel distribution pumps. Materials of the Republican scientific and technical conference on the development of the transport and road complex of the Republic of Azerbaijan. Baku; 2017. P.42-45. (in Russ.)]
5. Godzhaev K.M. Analiz rabochego protsessa s novym metodom dozirovaniya v dizel'nykh raspredelitel'nykh nasosakh vysokogo davleniya. Nauchnye trudy AzTU. Baku: AzTU; 2015. C.60-66. [Godzhaev K.M. Analysis of the working process with a new metering method in high-pressure diesel distribution pumps. Scientific works of AzTU. Baku: AzTU; 2015. P.60-66. (in Russ.)]
6. Godzhaev K.M. Osobennosti vnedreniya novogo doziruyuushchego metoda v dizel'nykh raspredelitel'nykh nasosakh vysokogo davleniya. Nauchnye trudy AzTU. Baku: AzTU; 2015. C. 94-100. [Godzhaev K.M. Features of the introduction of a new metering method in high-pressure diesel distribution pumps. Scientific works of AzTU. Baku: AzTU; 2015. P. 94-100. (inRuss.)]
7. Astakhov I.V. Toplivnye sistemy i ekonomichnost' dizelei. M.: Mashinostroenie; 1990. 288 s. [Astakhov I.V. Fuel systems and economy of diesel engines. M.: Mashinostroenie; 1990. 288 p. (in Russ.)]
8. Godunov S.K., Ryaben'kii V.S. Raznostnye skhemy.M.: Nauka; 1977. 440 s. [Godunov S.K., Ryaben'kii V.S. Difference schemes.M.: Nauka; 1977. 440 p. (in Russ.)]
9. Golubkov L.N., Perepelin A.P. Metod gidrodinamicheskogo rascheta toplivnoi sistemy dizelya s uchetom dvukhfaznogo sostoyaniya topliva. Rabochie protsessy v DVS i ikh agregatakh. M.:Tr. MADI; 1987. C. 80-87. [Golubkov L.N., Perepelin A.P. Method of hydrodynamic calculation of the diesel fuel system taking into account the two-phase fuel state. Work processes in ICE and their aggregates. M.:Tr. MADI; 1987. P. 80-87. (in Russ.)]
10. Djordjevic I. Patent No.: 99/22134. CT 06026 (US).
11. Mühlacker E.L., Schlagmüller W.,Schwieberdingen R. Bosch GmbH, Stuttgart, Germany. Patent No.: 4,667,639.
12. Ferziger J.H., Periс M. Computatational Methods for fluid Dynamics. Berlin: Springer; 2002. 423 p.
13. Heisler H. Advanced Engine Technology. London: Arnold Publications;1995.
14. Sussman M., Fatemi E., Smereka P., Osher S. An improved level set method for incompressible twophase flows. Livermore, CA, USA: Center for Computational Sciences and Engineering, LLNL;1997.
15. Ralbovsky E. Introduction to Compact and Automotive Diesels (It-Automotive Technology). 1st Edition. New-York: Delmar Publishers;1996.
16. Hollembeak B. Classroom Manual for Automotive Fuels and Emissions. Cengage Learning. 2005. P.154. Retrieved June 12, 2012.
17. Mollenhauer K., Tschцke H. Handbook of Diesel Engines. Berlin: Springer- Verlag; 2010.
Review
For citations:
Godzhaev К.M. INFLUENCE OF THE METERING METHOD ON THE CHARACTERISTICS OF A DIESEL DISTRIBUTOR FUEL PUMP. Herald of Dagestan State Technical University. Technical Sciences. 2018;45(2):52-61. (In Russ.) https://doi.org/10.21822/2073-6185-2018-45-2-52-61
Views:
658
Email this article 
