COMBINED COUNTERSINK-TAP TOOL FOR THE PROCESSING OF PARTS OF SHIP MACHINES, MECHANISMS AND FITTINGS: DESIGN AND CALCULATIONS
https://doi.org/10.21822/2073-6185-2018-45-2-8-17
Abstract
Objectives The aim of the study is to revise design and calculation methods for metal cutting tools due to an increase in their quality requirements. The design of metal cutting tools necessitatesfinding a solutionto a number of issues related to their calculation, construction, manufacture and operation. However, the methods for solving these issues have always been dependent on the means that the toolmaker had at his disposal.
Methods Contemporary electronic computers and digital equipment offersignificant opportunities for improving the process of machine tool design. To solve this problem, it is necessary to generate calculation methods that aresufficiently analytical to becapable of rigorously formalising the entire designing process. They have to support clearly defined optimisation criteria and be of sufficient generalityto enable all problems associated with tool designto be solved in a complex manner. That is, these calculation approaches have to support methodologies for solving the problems of the surface shaping by tools, calculating the cutting schemes, as well as the strength and manufacturability of the cutting part.
Results A flowchart of a calculation algorithm for designing and calculating the combined countersink-tap toolhas been developed, allowing the process of calculating its basic parameters to be automated according to a predefined programme.
Conclusion The developed flowchart of the calculation algorithm with the preset programme allows the process of calculating the basic parameters of the combined countersink-tap tools, used for threading in the parts of ship machines, mechanisms and ship fittings from hard-to-process materials, to be automated. The flowchart can similarly be used to automate the process of calculating the parameters of any cutting tools used to process any materials.
About the Authors
N. M. Vagabov
Daghestan State Technical University
Russian Federation
Russian Federation
70 I. Shamilya Ave., Makhachkala 367026
Nurulla M. Vagabov – Cand. Sci. (Technical), Senior Lecturer
A. Z. Kurbanov
Daghestan State Pedagogical University
Russian Federation
Russian Federation
57 Yaragskogo Ave., Makhachkala 367003
Ali Z. Kurbanov – Cand. Sci. (Technical), Prof
M. A. Magomedovа
Daghestan State Pedagogical University
Russian Federation
Russian Federation
57 Yaragskogo Ave., Makhachkala 367003
Marina A. Magomedovа – Cand. Sci. (Pedagogical), Senior Lecturer
References
1. Abdullaev A.V., Kurbanov A.Z., Khappalaev A.Yu. Tekhnologiya konstruirovaniya stal'nykh prisposoblenii i tekhnologicheskogo oborudovaniya. Makhachkala: Delovoi mir; 2003. 128 s. [Abdullaev A.V., Kurbanov A.Z., Khappalaev A.Yu. Technology of construction of steel appliances and technological equipment. Makhachkala: Delovoi mir; 2003. 128 p. (in Russ.)]
2. Bazarov B.M. Raschet tochnosti mashin na EVM. M.: Mashinostroenie; 2004. 256s. [Bazarov B.M. Calculation of the machine accuracy using a computer. M.:Mashinostroenie; 2004. 256 p.(in Russ.)]
3. Bronshtein I.N., Semendyaev K.A. Spravochnik po matematike dlya inzhenerov i uchashchikhsya vtuzov: uchebnoe posobie. Spb.: Izdatel'stvo “Lan'”; 2009. 68s. [Bronshtein I.N., Semendyaev K.A. A reference book on mathematics for engineers and students of technical institutions: a tutorial. Spb.: Lan’; 2009. 68 p. (in Russ.)]
4. Volynchev A.Z. Issledovanie rabotosposobnosti beskanavochnykh metchikov pri narezanii rez'by v nerzhaveyushchikh i zharoprochnykh materialakh. Dis.kan.tekh.nauk. Perm',1970. [Volynchev A.Z. The study of the performance of fluteless taps while threading in stainless and heat-resistant materials. Candidate of technical sciences thesis. Perm',1970.(in Russ.)]
5. Gruver M.Z. SAPR i avtomaticheskoe proektirovanie. M.: MIR; 2007. 125s. [Gruver M.Z. CAD and automatic design. M.: MIR; 2007. 125 p.(in Russ.)]
6. Dikhtyar F.S., Kurbanov Z.A. Metchik dlya narezaniya rez'by v trudnoobrabatyvaemykh materialakh. Sb.trudov NKhI, Nikolaev.1978;134:31-33. [Dikhtyar' F.S., Kurbanov Z.A. Taps for threading in hardto-work materials. Collection of works of NUOS, Nikolaev.1978;134:31-33.(in Russ.)]
7. Dykov A.T. Yasinskii G.I. Progressivnyi rezhushchii instrument v mashinostroenii. M.: Mashinostroenie; 2005. 223s. [Dykov A.T. Yasinskii G.IProgressive cutting tools in mechanical engineering. M.: Mashinostroenie; 2005. 223 p. (in Russ.)]
8. Zharlikov N.V. Kombinirovannye rezhushchie instrumenty. Ekaterinburg. 2001. 145s. [Zharlikov N.V. Combined cutting tools. Ekaterinburg. 2001. 145 p.(in Russ.)]
9. Zakharov V.V. Metchiki dlya izgotovleniya tochnykh rez'b. Progressivnye protsessy mashinostroeniya. Mezhduvedomstv. Sb. Nauchn. Trudov. Volgograd; 2002. S. 168-173. [Zakharov V.V. Taps for the manufacture of fine threads. Progressive processes of machine building. Interdepartmentalcollection of scientific works. Volgograd; 2002. P. 168-173.(in Russ.)]
10. Konoplev V.N., Urlapov V.G. Metchik dlya obrazovaniya rez'by v vyazkikh materialakh. AS №213547 V 23d. Byulleten' izobretenii i otkrytii. 1968; 10. [Konoplev V.N., Urlapov V.G. Tap for forming threads in viscous materials. AS №213547 V 23d. Bulletinof inventions and discoveries. 1968;10.(in Russ.)]
11. Korsak V.S., Kapustin N.M. Avtomatizatsiya proektirovanya tekhnologicheskikh protsessov v mashinostroenii. M.: Mashinostroenie; 2005. 320s. [Korsak V.S., Kapustin N.M. Automation of the design of technological processes in mechanical engineering. M.: Mashinostroenie; 2005. 320 p. (in Russ.)]
12. Kurbanov A.Z. Abdullaev A.V. Metchik dlya obrabotki trudno-obrabatyvaemykh materialov. Avtorskoe svidetel'stvo №1618535 ot 08.09.1990 g. [Kurbanov A.Z. Abdullaev A.V. Tap for processing difficult-to-process materials. Author's certificate№1618535 from 08.09.1990 (in Russ.)]
13. KurbanovA.Z., TynyanskiiV.P. Kombinirovannyimetchik. Mashinostroenie. 1984;5:45-157. [Kurbanov A.Z., Tynyanskii V.P. Combined tap. Mashinostroenie. 1984;5:45-157. (in Russ.)]
14. Kurbanov A.Z. Vysokoproizvoditel'noe narezanie vnutrennikh rez'b v trudno-obrabatyvaemykh materialakh. Monografiya. Makhachkala: Delovoi mir; 2004.108 s. [Kurbanov A.Z. High-performance tapping of internal threads in hard-to-process materials. Monograph. Makhachkala: OAO “Delovoi mir”; 2004.108 p. (in Russ.)]
15. Kurbanov A.Z. Nauchnoe obosnovanie progressivnykh tekhnologii narezaniya rez'b v detalyakh iz trudnoobrabatyvaemykh materialov. Makhachkala: Delovoi mir; 2012. 108 s. [Kurbanov A.Z. Scientific substantiation of progressive technologies of threading in details from hard-to-process materials. Makhachkala: Delovoi mir; 2012. 108 p. (in Russ.)]
16. Kurbanov A.Z. i dr. Tekhnologiya narezaniya tochnykh rez'b v trudnoobrabatyvaemykh materialakh (kombinirovannyi instrument zenker-metchik). Monografiya. Makhachkala; 2015. 104 s. [Kurbanov A.Z. et al. The technology of tapping precise threads in hard-to-process materials (combined countersink-tap tool). Monograph. Makhachkala; 2015. 104 p. (in Russ.)]
17. LashnevS.I., YulikovM.I. Raschet I konstruirovanie metallorezhushchikh instrumentov s primeneniem EVM. M.: Mashinostroenie; 1975. 390 s. [Lashnev S.I., Yulikov M.I. Computer-assisted calculation and design of metal-cutting tools. M.: Mashinostroenie; 1975. 390 p. (in Russ.)]
18. Matveev V.V. Narezanie tochnykh rez'b. M.: Mashinostroenie; 1978. 116 s. [Matveev V.V. Accurate thread cutting. M.: Mashinostroenie; 1978. 116 p. (in Russ.)]
19. Montgomeri D.K. Planirovanie eksperimenta i analiza dannykh. L. Sudostroenie; 1980. 384 s. [Montgomery D.K. Planning of experiment and data analysis. L. Sudostroenie; 1980. 384 p. (in Russ.)]
20. Nalimov V.V. Teoriya eksperimenta. M.: Nauka; 1971. 157 s. [Nalimov V.V. The theory of experiment. M.: Nauka; 1971. 157 p. (in Russ.)]
21. Poduraev V.N. Rezanie trudnoobrabatyvaemykh materialov. M.: Vysshaya shkola; 2008. 259 s. [Poduraev V.N. Cutting hard-to-work materials. M.: Vysshaya shkola; 2008. 259 p. (in Russ.)]
22. Ryzhenkov V.A., Yamnikov A.S. Ratsional'nye konstruktsii rez'bonareznykh instrumentov i tekhnologiya ikh izgotovleniya. Progressivnye tekhnologii v industrial'nom proizvodstve. M.: VNSh; 1979. P. 121 – 125. [Ryzhenkov V.A., Yamnikov A.S. Rational designs of thread-cutting tools and technology of their manufacture. Progressive technologies in industrial production. M.: VNSh; 1979. P. 121 – 125. (in Russ.)]
23. Taurit G.E., Pukhovskii E.S., Dobryanskii S.S. Progressivnyi protsess rez'boformirovaniya. Kiev; 1974. 233 s. [Taurit G.E., Pukhovskii E.S., Dobryanskii S.S. Progressive process of thread formation. Kiev; 1974. 233 p. (in Russ.)]
24. Tsvetkov V.D. Sistemno – strukturnoe modelirovanie i avtomaticheskoe proektirovanie TP. Minsk: Nauka; 2007. 302s. [Tsvetkov V.D. System - structural modeling and automatic design of TP. Minsk: Nauka; 2007. 302 s. (in Russ.)]
25. Chetverikov S.S. Materialorezhushchie instrumenty (proektirovanie i proizvodstvo). M.: Vysshaya shkola; 1995. 730s. [Chetverikov S.S. Material-cutting tools (design and production). M.: Vysshaya shkola; 1995. 730 p. (in Russ.)]
26. Shatin V.P., Shatin Yu.V. Spravochnik konstruktora instrumental'shchika. M.: Mashinostroenie; 1975. 456s. [Shatin V.P., Shatin Yu.V. Handbook of the designer - toolmaker. M.: Mashinostroenie; 1975. 456 p. (in Russ.)]
27. Vagabov N.M., Kurbanov A.Z. Obosnovanie i razrabotka zenker-metchika s novoi skhemoi rezaniya. Vestnik Dagestanskogo gosudarstvennogo tekhnicheskogo universiteta. Tekhnicheskie nauki. 2013;30(3):24-30. [Vagabov N.M., Kurbanov A.Z. Explanation and development of combined tool core drill tap with the new cutting scheme.Herald of Dagestan State Technical University. Technical Sciences. 2013;30(3):24-30. (In Russ.)]
28. Kurbanov A.Z. Obosnovanie progressivnoi tekhnologii narezaniya rez'b v detalyakh iz trudnoobrabatyvaemykh materialov. Avtoreferat dissertatsii na soiskanie stepeni kandidata tekhnicheskikh nauk. Leningrad; 1987. 20 s. [Kurbanov A.Z. Substantiation of the progressive technology of threading in details from hard-to-process materials. Published summary of the candidate of technical sciences dissertation. Leningrad; 1987. 20 p. (in Russ.)]
Review
For citations:
Vagabov N.M., Kurbanov A.Z., Magomedovа M.A. COMBINED COUNTERSINK-TAP TOOL FOR THE PROCESSING OF PARTS OF SHIP MACHINES, MECHANISMS AND FITTINGS: DESIGN AND CALCULATIONS. Herald of Dagestan State Technical University. Technical Sciences. 2018;45(2):8-17. (In Russ.) https://doi.org/10.21822/2073-6185-2018-45-2-8-17
Views:
839
Email this article 
