DYNAMOMETRIC EQUIPMENT FOR MEASURING THE COMPONENTS OF CUTTING STRENGTHS WHEN PROCESSING MATERIALS WITH AXIAL TOOLS

Objectives. The purpose of the study is to develop dynamometric equipment for measuring the components of cutting forces when processing materials with an axial tool in a dynamic mode.

Methods. The study is based on the application of electrical methods using piezoelectric and strain gauge transducers, whose main advantage is the ability to register and record fast-moving dynamic processes.

Results. Based on an analysis of existing dynamometers, the necessity of developing a new modern dynamometer device, which would allow the oscillations of the cutting force components to be registered and recorded in dynamic mode, is justified. The advantages of using strain sensors for a dynamometer are described. An analysis of the selected dynamometer design indicated that the sensors for measuring the axial forces and torque are located on one elastic element, which affects the accuracy of their measurement due to their mutual influence. Therefore, it was necessary to place them on different elastic elements. The developed and manufactured dynamometric equipment for carrying out the research work in the field of axial tools for processing materials is presented. The relative measurement error is calculated.

Conclusion. The dynamometric equipment makes it possible to record the periodic and quasiperiodic oscillations of two components of the cutting forces without distortion for various tapping, drilling and countersinking processes, occurring at a frequency of up to 1500 Hz in real time mode, and can be used to optimise the cutting parameters. Using the dynamometric equipment, it is possible to register the signals from up to 8 force sensors in real time, amplify signals, transform the signal from analogue to digital, visualise data and print out the results of experimental data. The equipment is suitable for use in research laboratories of machine-building enterprises, universities and other scientific institutions.

1. Dreval' A.E., Andrushko S.V., Fedotov N.I. Ustroistva diagnostirovaniya sostoyaniya rezhushchego instrumenta po dinamicheskim pokazatelyam. Materialy seminara ―Diagnostika tekhnologicheskikh protsessov‖. M.: Znanie; 1990. S. 6974. [Dreval' A.E., Andrushko S.V., Fedotov N.I. Devices diagnosing the state of the cutting tool by dynamic indicators. Materials of the seminar "Diagnostics of technological processes". M.: Znanie; 1990. P. 69-74. (In Russ.)]

2. Bez"yazychnyi V.F., Kordyukov A.V., Timofeev M.V., Fomenko R.N. Razrabotka dinamometricheskoi sistemy dlya izmereniya sily rezaniya pri tochenii. Izvestiya MGTU ―MAMI‖. 2014;1(19):171-176. [Bez"yazychnyi V.F., Kordyukov A.V., Timofeev M.V., Fomenko R.N. Development of a dynamometric system for measuring cutting force during turning. Izvestiya MGTU MAMI. 2014;1(19):171-176. (In Russ.)]

3. Tilcom: sait kompanii. Rezhim dostupa: (http://www.tilkom.com). Data obrashcheniya 04.03.2018. [Tilcom: website. Available at: (http://www.tilkom.com). Access date 04.03.2018. (In Russ.)]

4. Kistler: sait kompanii. Rezhim dostupa: (http://www.kistler.com). Data obrashcheniya 04.03.2018. [Kistler: website. Available at: (http://www.kistler.com). Access date 04.03.2018. (In Russ.)]

5. Guseynov R.V. Intensifikatsiya tekhnologicheskikh protsessov obrabotki trudnoobrabatyvaemykh materialov putem upravleniya dinamicheskimi parametrami sistemy. Avtoreferat dissertatsii na soiskanie uchenoy stepeni dokt. tekhn. nauk. Sankt-Peterburg; 1998. [Guseynov R.V. Intensification of technological processing of the hardly processed materials by the management of system's dynamic parameters. Published summary of Doctor of Technical Sciences thesis. St. Petersburg; 1998. (In Russ.)]

6. Zharkov I.G. Vibratsii pri obrabotke lezviinym instrumentom. L.: Mashinostroenie; 1985. [Zharkov I.G. Vibrations during processing with a blade tool. L.: Mashinostroenie; 1985. (In Russ.)]

7. P'ezoelement silochuvstvitel'nyi EPKV-10M // http://qsens.ru/products/epkv/54-epkv-10m.html. [EPKV-10M power sensitive piezoelement // http://qsens.ru/products/epkv/54-epkv-10m.html. (In Russ.)]

8. Guseinov R.V. Universal'noe ustroistvo dlya izmereniya bystromenyayushchikhsya sil rezaniya i amplitud vibratsii. Vestnik mashinostroeniya. 1993;9:24. [Guseinov R.V. Universal device for measuring rapidly changing cutting forces and vibration amplitudes. Russian Engineering Research.1993;9:24. (In Russ.)]

9. Mal'kov O.V., Golovko I.M. Eksperimental'noe opredelenie modeli sily pri rez'bofrezerovanii. Sbornik trudov Mezhdunarodnoi molodezhnoi konferentsii ―Innovatsii v mashinostroenii‖. Tomsk: Izd-vo Tomskogo politekhnicheskogo universiteta; 2012:73-77. [Mal'kov O.V., Golovko I.M. Experimental determination of the force model for thread milling. Proceedings of the International Youth Conference "Innovations in Mechanical Engineering". Tomsk: Izd-vo Tomskogo politekhnicheskogo universiteta; 2012:73-77. (In Russ.)]

10. Guseinov R.V. Matematicheskoe modelirovanie protsessa rezaniya korrozionno-stoikikh stalei. Vestnik Astrakhanskogo gosudarstvennogo tekhnicheskogo universiteta. Seriya: Morskaya tekhnika i tekhnologiya. 2015;4:65-70. [Guseinov R.V. Mathematical modeling of cutting process of corrosionresistant steels. Vestnik of Astrakhan State Technical University. Series: marine engineering and technologies. 2015;4:65-70. (In Russ.)]

11. Anіsіmov V.V., Anіsіmov V.M., Chuprina O.L. Perspektivnye napravleniya issledovanii v oblasti izmereniya usiliya rezaniya pri tochenii. Tekhnichni nauki ta tekhnologii. 2016;1(3):37-43. [Anіsіmov V.V., Anіsіmov V.M., Chuprina O.L. Prospective directions of research in the field of measuring the cutting force during turning. Technical sciences and technology. 2016;1(3):37-43. (In Ukrainian)]

12. Guseinov R.V., Rustamova M.R. Issledovanie vliyaniya geometricheskikh parametrov instrumenta na sily rezaniya pri obrabotke vnutrennikh poverkhnostei metodom planirovaniya eksperimentov. Vestnik Dagestanskogo gosudarstvennogo tekhnicheskogo universiteta. Tekhnicheskie nauki. 2011;21:8387. [Guseinov R.V., Rustamova M.R. Investigation of the influence of the tool geometric parameters on the cutting forces during the processing of internal surfaces by the method of experiment planning. Herald of Daghestan State Technical University. Technical Sciences. 2011;21:83-87. (In Russ.)]

13. Filippov A.V. Povyshenie tochnosti obrabotki nezhestkikh valov putem optimizatsii parametrov breyushchego tocheniya: Dis. kand. tekhn. nauk. Yurginskii tekhnologicheskii institut (filial) Tomskogo politekhnicheskogo universiteta. Yurga; 2015. 194 s. [Filippov A.V. Increase of processing accuracy of non-rigid shafts by optimisation of the parameters of shaving turning. Candidate of technical sciences dissertation. Yurginskii tekhnologicheskii institut (filial) Tomskogo politekhnicheskogo universiteta. Yurga; 2015. 194 p. (In Russ.)]

14. Sabirov F.S. Trekhkomponentnye datchiki vibratsii dlya diagnostiki stankov. Pribory. 2012;6:10-22. [Sabirov F.S. Three-component vibration sensors for machine diagnostics. Instruments. 2012;6:10-22. (In Russ.)]

15. Rukovodstvo po ekspluatatsii VKFU411.539.008RE. Rezhim dostupa: (http://www.rudshel.ru). Data obrashcheniya 04.03.2018. [VKFU411.539.008RE Manual. Available at: (http://www.rudshel.ru). Access date 04.03.2018. (In Russ.)]

16. Rukovodstvo po ekspluatatsii VKFU411.619.044RE. Rezhim dostupa: (http://www.rudshel.ru). Data obrashcheniya 04.03.2018. [VKFU411.619.044RE. Manual. Available at: (http://www.rudshel.ru). Access date 04.03.2018. (In Russ.)]

17. Mokeev I.I. Staticheskie i dinamicheskie znacheniya modulya uprugosti stali 30KhGSA. Izvestiya vuzov. Mashinostroenie. 1959;2:107-113. [Mokeev I.I. Static and dynamic values of the elasticity modulus of 30ХГСА steel. Proceedings of Higher Educational Institutions. Маchine Building. 1959;2:107-113. (In Russ.)]

18. Khaguntsev E.A. Kharakteristika tenzorezistornykh svyazuyushchikh. Izmeritel'naya tekhnika. 1988;10:35-37. [Khaguntsev E.A. Characteristic of strain gauge binders. Measurement techniques. 1988;10:35-37. (In Russ.)]