SATURATION OF THE SURFACE LAYER OF THE MIRROR CYLINDER OF PISTON INTERNAL COMBUSTION ENGINES IS HIGHLY ORGANIZED FORMS OF CARBON
https://doi.org/10.21822/2073-6185-2016-42-3-27-33
Abstract
Aim. The purpose of the real research also is consideration of a problem of creation in a blanket of a mirror of the working cylinder of the structure providing antiwear and antifrictional properties.
Methods. Opening of new forms of carbon - fullerenes and studying of their properties has channelized development of micromechanics of friction and wear on the basis of formation of new qualities of a blanket in couples of friction by saturation of its crystal structure by convex many-sided molecules of fullerenes, mainly to C60 and C70.
Results. In such cases the most acceptable will be technologies of drawing, for example – by means of a bezabrazivny honingovaniye (charging) of DVS cylinders. And new in this direction the fact that in this case the aim of introduction of fullerenes, by means of their diffusion, in a crystal lattice of a blanket of the detail which is exposed to friction and wear is pursued is important.
Conclusion. It is proved that the combination of temperature, barometric and intense factors at introduction of an implant in a blanket creates an opportunity to avoid during the operation of the engine of emergence of the thermoelastic forces seeking to push out bezabrazivny structure from hollows of a microrelief of rings and rest friction forces.
About the Authors
A. F. Dorokhov
Astrakhan State Technical University
Russian Federation
Russian Federation
doctor of technical Sciences, Professor,
16 Tatishchev St., Astrakhan, 414056
N. K. Sanaev
Daghestan State Technical University
Russian Federation
Russian Federation
candidate of economic Sciences, Dean of distance faculty, associate Professor of Department of organization and traffic safety, transport faculty,
70 I. Shamil Ave, Makhachkala, 367015
A. G. Provotar
Astrakhan branch Volga State University of water transport
Russian Federation
Russian Federation
head of the navigation Department of the Caspian Institute of sea and river transport,
14a Volga Embankment Backwater Ave, Astrakhan, 414056
References
1. Myshkin M.K., Petrokovets M.I. Friction, lubrication, wear. Physical foundations and technical applications of tribology. Moscow: Fizmatlit, 2007, pp.150-368. (In Russian)
2. Shneyder Yu.G. Technology of finishing by pressure: a Handbook. St. Petersburg: Politekhnika, [Politehnica], 1998, 414 p. (In Russian)
3. Technology hardening, coating and repair: theory and practice: proceedings of the 17th Intern. scientific.-pract. Conf. April 14-17, 2015. St. Petersburg: Publishing house of Polytechnical University, 2015, pp.345-365. (In Russian)
4. Eletskii A.V., Smirnov V.M. Fullerene. UFN, 1993, no. 2, pp.33-58. (In Russian)
5. Gusev A.I., Rempel A.A. Nanocrystalline Materials. Cambridge: Cambridge International Science Publishing, 2004, pp. 250-280.
6. Sidorov L.N., Yurovskaya M.A., Borshchevsky A.Ya. Fullerenes. Moscow: Exam, 2005, p.687. (In Russian)
7. Dorokhov A.F., Sanaev N.K. Investigation of the reliability of adhesion anti-friction coatings with the working surface of the cylinder marine engine.Vestnik Astrakhanskogo gosudarstvennogo tekhnicheskogo universiteta. Morskaya tekhnika i tekhnologiya. [Herald of Astrakhan State Technical University. Marine engineering and technology]. Astrakhan. Publishing house of ASTU, 2008, vol.46, no.5, pp.143-147. (In Russian)
8. Dorokhov A.F., Sanaa N.K., Masuev M.A. Reduction of power losses to overcome friction forces in marine high-speed diesel engines. Friction and lubrication in machines and mechanism B.A., and Yu. e Ugaste Mutual diffusion in multiphase metallic systems. Moscow: Nauka, 1981, 350p. (In Russian)
9. Diffusion in crystals: an Internet resource. Access mode http://dssp.petrsu.ru (In Russian)
10. Silva S.A.M., Perez J., Torresi R.M., Luengo C.A., Ticianelli E.A. Surface and electrochemical investigations of a fiillerene soot. Electrochimica Acta. 1999, vol.44, no.20, pp.3565 – 3574.
11. Yang Z.H., Wu H.Q. Electrochemical intercalation of lithium into fullerene soot. Mat Lett. 2001, vol.50, no.2, pp.108-114.
12. Wang Z., Ogata H., Morimoto Sh., Fujishige M., Takeuchi K., Hashimoto Y., Endo M. Hightemperature-induced growth of graphite whiskers from fullerene waste soot. Carbon, 2015, vol.90, pp.154-159.
13. Endo M., Kim Y.A., Hayashi T. et al. Microstructural changes induced in "stacked cup" carbon nanofibers by hit treatment. Carbon. 2003, vol.41, pp.1941 – 1947.
14. Goel A., Hebgen P., Vander Sande J.B., Howard J.B. Combustion synthesis of fullerenes and fullerenic nanostructures. Carbon, 2002, vol.40, no.2, pp.177- 182.
Review
For citations:
Dorokhov A.F., Sanaev N.K., Provotar A.G. SATURATION OF THE SURFACE LAYER OF THE MIRROR CYLINDER OF PISTON INTERNAL COMBUSTION ENGINES IS HIGHLY ORGANIZED FORMS OF CARBON. Herald of Dagestan State Technical University. Technical Sciences. 2016;42(3):27-33. (In Russ.) https://doi.org/10.21822/2073-6185-2016-42-3-27-33
Views:
583
Email this article 
