Multicomponent finishing materials with a modified polymer-composite binder
https://doi.org/10.21822/2073-6185-2026-53-2-229-235
Abstract
Objective. The aim of the study was to create modern, effective finishing materials with high performance, physical, mechanical, and environmentally friendly properties.
Method. Methods for shaping the strength of composite building materials with a multicomponent structure were used.
Result. The introduction of polymer additives improved the key strength parameters of the material: flexural strength increased by 10-15 times, and compressive strength increased by 5-7 times.
Conclusion. The introduction of highly effective modifying additives increases the durability of materials by specifically altering their internal structure. Installation compounds produced using modified polymer carbonate binders are characterized by high plasticity and improved workability. The adhesion properties of the material can be improved by incorporating polymer components such as carboxymethyl cellulose.
Keywords
Supporting agencies: This work was carried out as part of the Priority 2030 federal university support program using equipment at the V.G. Shukhov BSTU High Technology Center.
About the Authors
S. V. Solovyov
V.G. Shukhov Belgorod State Technological University
Russian Federation
Russian Federation
Sergey V. Solovyov, Graduate Student, Department of Building Materials Science
46 Kostyukova St., Belgorod 308012
M. V. Yaremchuk
V.G. Shukhov Belgorod State Technological University
Russian Federation
Russian Federation
Maxim V. Yaremchuk, Graduate Student, Department of Building Materials Science
46 Kostyukova St., Belgorod 308012
References
1. Frolova, M.A. Criterion for evaluating the energy properties of a surface / M.A. Frolova, A.S. Tutygin, A.M. Aisenstadt et al. Nanosystems: physics, chemistry, mathematics. 2011;2(4):120-125. (In Russ)
2. Ivanchenko, A.G. The state of the global market for high-tech industries / A.G. Ivanchenko, D.S. Ushakov. Young Scientist. 2018;17 (203):174-178. (In Russ)
3. Lord, E. New geometry for new materials. / E. Lord, A.L. McKay, S. Ranganathan, Translated from English by L.P. Mezentseva, edited by V.Ya. Shevchenko, V.E. Dmitrienko. M.: FIZMATLIT, 2010: 264.
4. Gorchakov G.I. Building materials, Moscow: Higher School. 1981:412. (In Russ)
5. Lebedev M.M. Handbook of a young plasterer, Moscow: Vysshaya shkola Publ., 1984, 159. (In Russ)
6. Marvasi M., Mastromei G., Perito B. Strategy of bacterial mineralization with calcium carbonate in situ for the preservation of stone artworks: from cellular components to the microbial community. Front. Microbiology. 2020;11:1386. DOI: 10.3389/fmicb.2020.01386.
7. Zhu T., Dietrich M. Precipitation of carbonates as a result of the activity of microorganisms in the natural environment and their potential in biotechnology. Review: Bioengineering and Biotechnology. 2016;4, DOI: 10.3389/fbioe.2016.00004.
8. Tolstoy A.D., Krymova A.I. Application of synergetic principles of self-organization in the theory of hardening of building composites. Bulletin of BSTU named after V.G. Shukhov. 2018;9:24-29.(In Russ)
9. S.A. Dergunov, S.A. Orekhov dry building mixes (composition, technology, properties) 2012. (In Russ)
10. Erofeev V.T., Bogatova S.N., Bogatov A.D., Kaznacheev S.V. Composites of a frame structure on mixed binders. Izvestiya Yugo-Zapadnogo gosudarstvennogo universiteta. 2011;5-2 (38): 421-426. (In Russ)
11. Fedyaev V.L., Galimov E.R., Belyaev A.V., Sirotkina L.V. Influence of porosity of technical materials on their strength properties. Bulletin of KSTU, 2023;2(156),:28-35. doi:10.26730/1999-4125-2023-2-28-35 (In Russ)
12. J. Lini, H. Bremmer. New design strategy – product durability. Fundamentals of Electronic System Design. Springer International Publishing, 2017;201-203.doi:10.1007/978-3-319-55840-0.ISBN978-3-319-55839-4.
13. Kuzina A.A. Composite materials: a textbook. Samara: Samara University Press, 2023; 64. (In Russ)
14. Neuchodina L.K., Petrova Yu.S. , Lakiza N.V. , Lebedeva E.L. Electrochemical methods of analysis. Practicum / Educational method. manual, UFA, Yekaterinburg, 2014;136 p. ISBN 978-5-7996-1276-4 (In Russ)
15. Erofeev V.T., Bogatova S.N., Bogatov A.D., Kaznacheev S.V. Composites of a frame structure on mixed binders. Izvestiya Yugo-Zapadnogo gosudarstvennogo universiteta. 2011;5-2 (38): 421-426. (In Russ)
Review
For citations:
Solovyov S.V., Yaremchuk M.V. Multicomponent finishing materials with a modified polymer-composite binder. Herald of Dagestan State Technical University. Technical Sciences. 2026;53(2):229-235. (In Russ.) https://doi.org/10.21822/2073-6185-2026-53-2-229-235
Views:
13
JATS XML
Email this article 
