The problem of creating and developing an integrated approach to standardization process of automated testing of turboexpanders
https://doi.org/10.21822/2073-6185-2024-51-2-23-30
Abstract
Objective. The purpose of the study is to discuss the issue of creating and developing an integrated methodological approach to testing and standardizing the process of testing turboexpanders based on automation equipment, taking into account the existing and potential demand for domestic turbine units by 2035 under the conditions of sanction pressure.
Method. Identification of the problem and formation of an approach to its solution based on the existing domestic experience in testing turboexpanders, taking into account the introduction of automation tools and analysis of potential consumers of properly marked and structured data on the characteristics of the machine. Development and implementation of automatic regulation and control systems for low-temperature machines.
Result. In accordance with the general classification of product testing, 9 types of research have been identified that are of scientific and practical interest in the experimental determination of the most relevant parameters of turboexpanders: isentropic efficiency, stability of the rotor and impellers, strength of impellers, vibration and noise characteristics.
Conclusion. Based on the list of tests and the main characteristics of the machines, the place of application of experimental data was determined and requirements for means of conducting automated tests were formed in order to optimize cryogenic systems as a whole.
About the Authors
V. M. Mamedov
N.E. Bauman Moscow State Technical University
Russian Federation
Russian Federation
Vladislav M. Mamedov, Postgraduate Student, Assistant Teacher, Department E4 «Refrigeration and cryogenic technology, air conditioning and life support systems», Design Engineer I-st category
2nd Baumanskaya St., 5, building 1, Moscow 105005
I. A. Arkharov
N.E. Bauman Moscow State Technical University
Russian Federation
Russian Federation
Ivan A. Arkharov, Dr. Sci. (Eng.), Prof., Department E4 «Refrigeration and cryogenic technology, air conditioning and life support systems»
2nd Baumanskaya St., 5, building 1, Moscow 105005
References
1. Hetagurov, V.A. Experience and prospects for the use of turboexpander units at field technological facilities of the Russian gas industry. V.A. Hetagurov, P.P. Slugin, M.A. Voroncov et al. Gas industry. 2018; 11(777):14-22. (In Russ)
2. Yacenko, I.A. Realizing the energy saving potential and increasing the energy efficiency of PJSC Gazprom based on the use of turboexpander technologies. I.A. Yacenko, G.A. Hvorov, M.V. Yumashev et al. Gas industry. 2017; S1 (750):60-63. (In Russ)
3. Mamedov, V.M. Features of energy and dynamic tests of large-capacity turboexpanders. V.M. Mamedov, I.A. Arkharov. Collection of the All-Russian student conference “Student Scientific Spring”, dedicated to the 170th anniversary of V.G. Shukhova, 2023; 743-745. (In Russ)
4. GOST R 53637-2009. Automotive turbochargers. General technical requirements and test methods. – Enter. 2010–01–06. – M.: Standartinform, 2010;12. (In Russ)
5. GOST R 51743-2001. Refrigerating machines. Machines for liquid cooling based on turbocompressors. Test methods. – Enter. 2002–01–01. – M.: Standards Publishing House, 2001; 21. (In Russ)
6. GOST 16504-81. System of state testing of products. Testing and quality control of products. Basic terms and definitions. – Enter. 1982–01–01. – M.: Standartinform, 2011; 24. (In Russ)
7. GOST R ISO 14839-2-2011. Vibration. Vibration of rotary machines with active magnetic bearings. Part 2. Vibration state assessment. – Enter. 2012–01–09. – M.: Standartinform, 2012;24. (In Russ)
8. GOST R ISO 14839-3-2013. Vibration. Vibration of rotary machines with active magnetic bearings. Part 3. Determination of the stability margin. – Enter. 2011–09–11. – M.: Standartinform, 2014;36. (In Russ)
9. Bolotov, M.A. Algorithm for predicting the vibration state of a turbine rotor using machine learning / M.A. Bolotov, V.A. Pechenin, E.Yu. Pechenina, et al. Bulletin of Samara University. Aerospace engineering, technology and mechanical engineering. 2020; 19(1):18-27. DOI: 10.18287/2541-7533-2020-19-1-18-27. (In Russ)
10. Galerkin, Yu. B., A. F. Rekstin, V. B. Semenovsky et al Development of approaches and experience in optimal design of centrifugal compressors of turboexpander units. Omsk Scientific Bulletin. Series “Aviation, missile and power engineering”. 2022; 6(2) 9-20. DOI: 10.25206/2588-0373-2022-6-2-9-20. (In Russ)
11. Kaminsky, V.N. Creation of stands for control and research tests of turbochargers / V.N. Kaminsky, R.V. Kaminsky, A.V. Lazarev and etc. . News of MSTU "MAMI",. 2(14), 2012; 1:143-148. (In Russ)
12. Menshikov, S.N. Improving the quality of repair of turboexpander units installed at the Bovanenkovo oil and gas condensate field / S.N. Menshikov, S.S. Kildiyarov, V.V. Moiseev et al. Gas industry, 2014; 3 (773): 28-33. (In Russ)
13. Mamedov, V.M., Arkharov I.A. Prospects for control methods in engineering systems. Refrigeration Technology. 2022; 111(4): 213-220. DOI: 10.17816/RF321953(In Russ)
14. Yuhan Li, Haitao Hu, Rui Lei. Performance simulation and diagnosis of faulty states in air-cycle refrigeration systems in civil aircrafts. International Journal of Refrigeration, 2023; 156:232-242, ISSN 0140-7007, DOI: https://doi.org/10.1016/j.ijrefrig.2023.10.006.
15. Blinov, V.L. Digital twins of turbomachines: a tutorial. V.L. Blinov, S.V. Bogdanets. Ekaterinburg: Ural Publishing House. Univ., 2022; 162. (In Russ)
16. Mamedov, V.M. Development of interactive VR simulators based on VR Concept software and Ionium Collider framework. International Journal of Open Information Technologies. 2023;11(9): 83-91. (In Russ)
17. Certificate of state registration of the computer program No. 2023617337 Russian Federation. Ionium Collider Framework for creating APCS interfaces: No. 2023615806: Appl. 03/21/2023: publ. 04/07/2023 / V.M. Mamedov. (In Russ)
18. Klimenko D.V., Timushev S.F., Firsov V.P. et al. Numerical modeling of pressure pulsations in the turboexpander of a promising cryostat system. Dynamics and vibroacoustics. 2014; 1(2): 50-55. (In Russ)
19. Galerkin, Yu.B. Statistical mathematical model for calculating the efficiency of compressors of turboexpander units: improvement and identification. Yu.B. Galerkin, A.F. Rekstin, O.A. Solovyova and etc. News of higher educational institutions. Mechanical Engineering, 2022;7: 68–81, DOI: 10.18698/0536-1044-2022-7-68-81. (In Russ)
20. Bashirova, E.M. Application of neural networks to solve problems of predicting the technical condition of electrical equipment. E.M. Bashirova, Yu.A. Zharinov, A.A. Terentyev. Electrical engineering and information complexes and systems, 20222; 2(18):21-31. (In Russ)
Review
For citations:
Mamedov V.M., Arkharov I.A. The problem of creating and developing an integrated approach to standardization process of automated testing of turboexpanders. Herald of Dagestan State Technical University. Technical Sciences. 2024;51(2):23-30. (In Russ.) https://doi.org/10.21822/2073-6185-2024-51-2-23-30
Views:
193
Email this article 
