Influence of design solutions during dynamic calculations building frame of complex shape
https://doi.org/10.21822/2073-6185-2024-51-1-180-186
Abstract
Objective. Investigation of the influence of the design scheme on the dynamic characteristics of the frame of a building of complex shape in plan.
Method. Four variants of structural solutions for the frame of a complex-shaped building have been developed and four spatial finite element models have been built in the Lira-SAPR software package. The final elements are assigned design materials and sections. The models take into account loads and impacts in accordance with the current regulatory documentation for the selected construction area. The ground base is taken into account according to the one-parameter Winkler model.
Results. Dynamic calculation of the developed models of the building frame was performed, frequencies, forms of natural oscillations, acceleration of the upper floor were obtained. The results obtained were compared with the regulatory requirements, their impact on the cost-effectiveness of the design solutions of the building under study was considered.
Conclusion. The analysis of the dynamic calculation results showed that the use of several design options makes it possible to choose the most economical version of the building frame. Also, as a result of the study, it was found that cutting the frame of a complex shape in terms of simple blocks is not always effective from the point of view of optimizing dynamic characteristics.
About the Authors
E. K. Agakhanov
Daghestan State Technical University
Russian Federation
Russian Federation
Elifkhan K. Agakhanov, Dr. Sci. (Eng.), Prof., Department of Transport Facilities and Construction Materials
70 I. Shamilya Ave., Makhachkala 367026, Russia
M. K. Agakhanov
Moscow State University of Civil Engineering (National Research University) (MGSU)
Russian Federation
Russian Federation
Murad K. Agakhanov, Cand. Sci. (Eng.), Assoc. Prof., Assoc. Prof., Department of Strength of Materials
26 Yaroslavskoe highway, Moscow 3129337, Russia
E. V. Trufanova
Don State Technical University
Russian Federation
Russian Federation
Elena V. Trufanova Cand. Sci. (Eng.), Assoc. Prof., Assoc. Prof., Department of Technical Mechanics
1 Gagarin Square, Rostov-on-Don 344000, Russia
D. A. Vysokovsky
Don State Technical University
Russian Federation
Russian Federation
Dmitry A. Vysokovsky, Cand. Sci. (Eng.), Assoc. Prof., Assoc. Prof., Department of Technical Mechanics
1 Gagarin Square, Rostov-on-Don 344000, Russia
A. Z. Dzhabrailov
Don State Technical University
Russian Federation
Russian Federation
Adalet Z. Dzhabrailov, Postgraduate student of the Department of Transport Structures and Building Materials
1 Gagarin Square, Rostov-on-Don 344000, Russia
References
1. Khomyakov I.P. Wind influences on high-rise buildings. Alley of Science. 2018; 1(5) (21):599-604. (In Russ)
2. Agakhanov, E.K., Kravchenko G.M., Trufanova E.V. Regulation of parameters of natural vibrations of the spatial frame of a building. Herald of the Daghestan State Technical University. Technical Sciences. 2016; 42(3):8-15. (In Russ)
3. Kravchenko G.M., Trufanova E.V., Ladnaya E.V. Rational design of elements of the spatial frame of a building. Engineering Bulletin of the Don, 2017: 1(In Russ)
4. Batht K.-J. Finite Element Procedures. New Jersey: Prentice Hall, 1996:95-97.
5. Engel H. Structure Systems. Stuttgart: Deutsche Verlags-Anstalt. 1967:23-24.
6. Sagdatullin M.K. Statement of the problem of numerical modeling of finite deformations via FEM. Bulletin of the Kazan Technological University. 2013: 5. URL: https://cyberleninka.ru/article/n/postanovka-zadachichislennogo-modelirovaniya-konechnyh-deformatsiy-mke (In Russ)
7. Agakhanov E.K. On the development of complex methods for solving problems in the mechanics of a deformable solid. Herald of the Daghestan State Technical University. Technical Sciences, 2013:14-19. (In Russ)
8. Agakhanov E.K. Variational principles of structural mechanics. In the book: Science week - 2015 Collection of abstracts of reports of the XXXVI final scientific and technical conference of teachers, staff, graduate students and students of the Daghestan State Technical University. Ed. T.A. Ismailov. 2015: 118-119. (In Russ)
9. Agakhanov G.E. Solving problems of mechanics of a deformable solid using fictitious calculation schemes. Herald of the Daghestan State Technical University. Technical Sciences. 2015:3. (In Russ)
10. Agakhanov E.K. Development of complex methods in the mechanics of deformable solids, Proceedings of the International Scientific and Practical Conference, Federal State Budgetary Educational Institution of GGNTU, Grozny, 2015: 99-105. (In Russ)
11. Abdurazakov G.M., Abakarov A.D. Construction of computational models for assessing the survivability of frame systems under seismic impact in the collection: issues of modern technical sciences: a fresh look and new solutions. Collection of scientific papers based on the results of the international scientific and practical conference. 2015: 58-61. (In Russ)
12. Fedorov D.A., Moklyak K.G. Numerical study of the problem of joint calculation of structures with foundations based on implementations in the SCAD and LIRA computer systems. News of higher educational institutions. Construction. 2011; 12: 97-104. (In Russ)
13. Semenov V.S., Tokarsky A.V., Abdymomunov E.D. The influence of the elastic properties of the soil foundation on the "base - building - attic" system. Bulletin of the Kyrgyz-Russian Slavic University. 2019; 19 (8): 121-126.
14. Agakhanov E.K., Kravchenko G.M., Osadchiy A.S., Trufanova E.V. Calculation of buildings with complex geometric shapes for wind influences. Herald of the Daghestan State Technical University. Technical Sciences. 2017; 44 (2): 8-17. (In Russ)
15. Kravchenko G.M., Korobkin A.P., Trufanova E.V., Lukyanov V.I. Criteria for evaluating dynamic models of a reinforced concrete building frame, Science Time, 2014: 255-260.
16. Murtazaliev G.M., Akaev A.I., Paizulaev M.M. Basic relations of the initial stage after critical deformation of structures. Herald of the Daghestan State Technical University. Technical Sciences. 2013; 28: 90-93.
17. Murtazaliev G.M., Dibirgadzhiev A.M. Variational principles of structural mechanics. In the book: Science week - 2015. Collection of abstracts of the XXXVI final scientific and technical conference of teachers, staff, graduate students and students of the Daghestan State Technical University. Ed. T.A. Ismailova. 2015: 118-119. (In Russ)
18. Simbirkin V. Analysis of Reinforced Concrete Loadbearing Systems of Multistorey Buildings. Modern Building Materials, Structures and Techniques: CD-ROM Proceedings of the 8th International Conference, Vilnius, May 19-21, 2004: 98-99.
19. Kshnyakin A.Yu., Tsuprik V.G. Taking into account changes in the strength characteristics of structural materials in calculations of the durability of unique structures based on the dynamic parameters of the structure. Eurasian Union of Scientists. 2018; 4-1(49): 26-33(In Russ)
20. Kravchenko G.M., Trufanova E.V., Bykadorov D.A., Borisov M.V. Regulation of the stress-strain state of a unique building. Construction and architecture - 2022: materials of the international scientific and practical conference of the Faculty of Industrial and Civil Engineering, Rostov-on-Don, April 19–21, 2022. Rostov-on-Don: Don State Technical University, 2022: 306-307. (In Russ)
Review
For citations:
Agakhanov E.K., Agakhanov M.K., Trufanova E.V., Vysokovsky D.A., Dzhabrailov A.Z. Influence of design solutions during dynamic calculations building frame of complex shape. Herald of Dagestan State Technical University. Technical Sciences. 2024;51(1):180-186. (In Russ.) https://doi.org/10.21822/2073-6185-2024-51-1-180-186
Views:
327
Email this article 
