Development of a computer simulation model of a three-phase asynchronous electric drive using an adjustable transistor reducer
https://doi.org/10.21822/2073-6185-2023-50-2-76-82
Abstract
Objective. The purpose of this work is to study the characteristics of an electric drive using a transistor reducer of an induction motor using computer simulation tools.
Method. The study is based on simulation methods.
Result. The values of the angular velocity are determined at fixed values of the moment of resistance for constructing a static mechanical characteristic, as well as the values of the efficiency and power factor with increasing active power on the motor shaft. The values of similar quantities for the electric motor, which is powered by a phase-shifting capacitor, are determined. The dependences of the power factor and efficiency on the active power on the motor shaft are determined.
Conclusion. The data obtained as a result of computer simulation testify to the effectiveness of the proposed transistor reducer.
About the Authors
S. Yu. Eremochkin
I.I. Polzunova Altai State Technical University
Russian Federation
Russian Federation
Sergey Yu. Eremochkin, Cand.Sci.(Eng), Assoc. Prof., Department of Electrical Engineering and Automated Electric Drive
46 Lenin Ave., Barnaul 656038
A. A. Zhukov
I.I. Polzunova Altai State Technical University
Russian Federation
Russian Federation
Aleksey A. Zhukov, Undergraduate, Department of Electrical Engineering and Automated Electric Drive
46 Lenin Ave., Barnaul 656038
D. V. Dorokhov
I.I. Polzunova Altai State Technical University
Russian Federation
Russian Federation
Danil V. Dorokhov, Undergraduate, Department of Electrical Engineering and Automated Electric Drive
46 Lenin Ave., Barnaul 656038
References
1. Sokolovsky G.G. Alternating current electric drives with frequency control : textbook. manual. Academy; 2006; 272. (In Russ)
2. Biryukov S. Three phases – without loss of power . Radio. 2000; 7; 37. (In Russ)
3. Makarov V. G. Actual problems of asynchronous electric drive and methods of their solution. Bulletin of Kazan Technological University. 2011; 6; 79-93. (In Russ)
4. Makarov V. G. Analysis of the current state of the theory and practice of asynchronous electric drive. Bulletin of Kazan Technological University. 2011; 6; 109-120. (In Russ)
5. Gryazev M. V., Kuznetsova O. A. Optimal control of asynchronous electric drive. Izvestiya Tula State University. Technical Sciences. 2011; 5; 212-220. (In Russ)
6. Khalina T. M., Stalnaya M. I. Investigation of the characteristics of an electric drive with a vectoralgorithmic type converter. Electrical Engineering. 2018; 12; 48-52. (In Russ)
7. Halina T.M., Stalnaya M.I. On the question of the effective use of mobile machines in the agro-industrial complex. Achievements of science and technology of the agro-industrial complex. 2017; 31; 76-80. (In Russ)
8. Tsvenger I. G. Comparative analysis of software tools for modeling electromechanical processes in an electric drive. Bulletin of Kazan Technological University. 2014; 12; 246-251. (In Russ)
9. Omelchenko E. Ya., Kharlamov A.V. Computer simulation of transients in asynchronous electric drive. Electrotechnical systems and complexes. Magnitogorsk. 1998; 36-42. (In Russ)
10. Kupriyashkin A.G. Fundamentals of systems modeling : textbook. stipend. Norilsk. Research Institute; 2015; 135. (In Russ)
11. Schreiner R. T. Mathematical modeling of AC electric drives with semiconductor frequency converters Bulletin of the Ural Branch of the Russian Academy of Sciences. 2000; 254. (In Russ)
12. Kozyaruk A. E. Modern and promising algorithmic support of frequency-controlled electric drives . St. Petersburg Electrotechnical Company. 2004; 127. (In Russ)
13. Denisov V. A., Tretyakova M. N., Borodin O. A. Mathematical modeling of asynchronous electric drives with vector control.Electrotechnical complexes and systems. 2016; 1; 5-11. (In Russ)
14. Katsman M.M. Electric machines : textbook. stipend. Moscow. Academy; 2013; 496. (In Russ)
15. Pat. 2402864 Russian Federation, IPC N02R 1/42, N02R 1/26, NO2M 5/27. Adjustable transistor reducer of a three-phase asynchronous motor powered by a single-phase network / M. I. Stalnaya, A. P. Borisov, P. S. Cheremisin, A. S. Fomin; applicant and patent holder of the Altai State Technical University named after I.I. Polzunov. No. 2009129723/07 ; application. 03.08.2009; publ. 27.10.2010; (30). (In Russ)
16. Danilenko A. F., Zmievskoy V. A. Asynchronous electric drive control. Bulletin of the National Technical University of Kharkiv Polytechnic Institute. Series: Computer Science and Modeling; 2005; 48-51. (In Russ)
17. Akopov A.S. Simulation modeling : textbook. stipend. Lyubertsy. Yurait; 2016; 389. (In Russ)
18. Block libraries [Electronic resource]SimInTech reference system. URL: https://help.simintech.ru/#o_simintech/browsers.html / (accessed: 01.11.2022). (In Russ)
19. Halina T.M., Eremochkin S. Yu., Dorokhov D. V. Development of an energy-efficient electric drive for agricultural machines IXX International Scientific and Practical Conference: Energy and Resource conservation XXI century (ERS 2021), November 10-12, 2021 DOI: 10.1088/1757-899X/1211/1/012018. (In Russ)
20. Eremochkin Sergey, Dorokhov Danil. Investigation of the characteristics of a semiconductor frequency converter in Matlab Simulink / XV International Scientific and Technical Conference on Current Problems of Electronic Instrumentation (APEIE), November 19-21, 2021. DOI: 10.1109/APEIE52976.2021.9647561. (In Russ)
Review
For citations:
Eremochkin S.Yu., Zhukov A.A., Dorokhov D.V. Development of a computer simulation model of a three-phase asynchronous electric drive using an adjustable transistor reducer. Herald of Dagestan State Technical University. Technical Sciences. 2023;50(2):76-82. (In Russ.) https://doi.org/10.21822/2073-6185-2023-50-2-76-82
Views:
230
Email this article 
