Features of the work of large-span beam structures
https://doi.org/10.21822/2073-6185-2022-49-3-152-160
Abstract
Objective. This article discusses flat large-span structures, provides features of their work, as well as design examples. Formulas are given for determining the general dimensions of these structures.
Method. Features of work and design, as well as calculation formulas are given. Shipping marks, types of sections and junctions of elements are given. A technique is described that allows to reduce span bending moments. Examples of rational design of beam trusses are given.
Result. The given structural diagrams, as well as the analysis of their work, allow us to design long-span flat structures that are reliable, lightweight, technologically advanced in terms of manufacturing, transportation and installation. The types of sections and junctions described in the article are used in the practice of design and construction.
Conclusion. The article discusses rational design solutions that allow reducing the own weight of flat large-span structures due to the optimal choice of their design and design scheme.
Keywords
About the Authors
A. K. Yusupov
Daghestan State Technical University
Russian Federation
Russian Federation
Dr. Sci. (Eng.), Prof., Department of Building Structures and Hydraulic Structures
70 I. Shamilya Ave., Makhachkala 367026, Russia
H. M. Muselemov
Daghestan State Technical University
Russian Federation
Russian Federation
Cand.Sci. (Eng.), Assoc. Prof., Department of Building Structures and Hydraulic Structures
70 I. Shamilya Ave., Makhachkala 367026, Russia
R. I. Vishtalov
Daghestan State Technical University
Russian Federation
Russian Federation
Cand.Sci. (Eng.), Assoc. Prof. of the Department of Building Structures and Hydrotechnical Structures
70 I. Shamilya Ave., Makhachkala 367026, Russia
References
1. Metal structures” – edited by Yu.I. Kudishina, Moscow, Academy, 2008 (In Russ)
2. "Metal structures" - edited by E.I. Belenya, Moscow, Stroyizdat, 1986(In Russ)
3. Belenya E.N. Prestressed load-bearing metal structures. –2nd ed. - Moscow, Strooyizdat, 1975; 415 p. (In Russ)
4. Metal structures (special course) - 2nd ed. under the editorship of Belenya E.N., Moscow, Strooyizdat, 1976; 600. (In Russ)
5. Brudka Jan, Lubinski Mechislav. Light steel structures (translated from Polish). Moscow, Strooyizdat, 1974. (In Russ)
6. Metal structures: A designer's guide. 2nd ed. Under the editorship of Melnikov M.P. - Moscow, stroy.izdat. 1980; 776. (In Russ)
7. Handbook of the designer "Steel structures" - edited by Shumakov 2004 (In Russ)
8. "Fundamentals of metal structures" V.V. Maslov, Volgograd (In Russ)
9. SP 20.13330.2016 Code of Practice. Loads and impacts. Updated edition of SNiP 2.01.07-85. (In Russ)
10. SP 16.13330.2017 "Steel structures". M.: Standartinform, JSC "Research Center "Construction" - TsNIISK named after V.A. Kucherenko, 2017; 92. (In Russ)
11. Handbook of the designer "Steel structures" - edited by Shumakov 2004 (In Russ)
12. Trofimov V.I., Eremeev P.G. "Membrane structures of buildings and structures" Moscow, Stroyizdat, 1990. (In Russ)
Review
For citations:
Yusupov A.K., Muselemov H.M., Vishtalov R.I. Features of the work of large-span beam structures. Herald of Dagestan State Technical University. Technical Sciences. 2022;49(3):152-160. (In Russ.) https://doi.org/10.21822/2073-6185-2022-49-3-152-160
Views:
252
Email this article 
