Algorithm for numerical calculation of nonlinear lenticular membrane-pneumatic systems by iterative method of parameter increments taking into account the aftereffect of air pressure
https://doi.org/10.21822/2073-6185-2022-49-2-133-142
Abstract
Objective. The purpose of this study is to create a static calculation algorithm to determine the maximum bearing capacity of a lenticular membrane-pneumatic system for covering large spans under the action of external force loads.
Method. A numerical study of a large-span membranepneumatic structure was carried out by the step method of incrementing parameters using the finite element method and the Euler-Cauchy numerical procedure of the third order of accuracy at the step.
Result. The authors have developed a technique for computer static calculation of geometrically and physically nonlinear lenticular membrane-pneumatic systems of coatings for large span structures by the iterative method of parameter increments with the phased application of the finite element method in the form of the displacement method, the universal equation of gas state and the improved Euler-Cauchy numerical procedure of the third order of accuracy.
Conclusion. Ignoring the aftereffect in the calculations means the imbalance of the system due to unbalanced pneumatic forces calculated with an error of 11.2% and affecting, as the calculations showed, in the amount of approximately 7% percent on the increment of excess air pressure in the lens.
About the Authors
A. Yu. KimRussian Federation
Dr.Sci. (Eng), Prof., Department of Building Materials, Structures and Technologies,
77 Politekhnicheskaya Str., Saratov 410054
M. F. Amoyan
Russian Federation
Postgraduate Student, Department of Building Materials, Structures and Technologies,
77 Politekhnicheskaya Str., Saratov 410054
V. E. Khapilin
Russian Federation
Postgraduate Student, Department of Building Materials, Structures and Technologies,
77 Politekhnicheskaya Str., Saratov 410054
References
1. Gorodeczkij A.S. Finite element method in the design of transport facilities.M.: Transport. 1981:143. (In Russ)
2. Davidenko D. F. On the application of the parameter variation method to the theory of nonlinear functional equations. Ukr. matem. Journal 1955; 7: 56–64. Kiev.
3. Davidenko D.F. On the application of the parameter variation method to the construction of iterative formulas of increased accuracy for determining the numerical solutions of nonlinear integral equations. Dokl. AN SSSR, M., 1965; 162: 78–85. (In Russ)
4. Ivanova T.V., Al`bert I.U., Kaufman B.D., Shul`man S.G. Bearing capacity of hanging piles according to the criterion of the strength of the pile material or soil. [Inzhenerno-stroitel`ny`j zhurnal] Civil Engineering Journal 2016; 7 (67): 3-12. (In Russ)
5. Ignatiev A.V. Basic formulations of the finite element method in problems of structural mechanics. Vestnik MGSU. 2015;3(1):16—26. (In Russ)
6. Kim A.Yu. Iterative method of parameter increments for calculation of nonlinear membrane-pneumatic systems taking into account the elastic work of air.. Vestnik SGAU. 2005; 1: 39-42. (In Russ)
7. Kim A.Yu. Calculation of membrane-pneumatic systems taking into account non-linear factors. Monograph. Continuum calculation schemes. Sarat. state agrarian un-t. Saratov 2000; (1148):198 Dep. v VINITI 24.04.00. (In Russ)
8. Kim A.Yu. Multi-span membrane-rod coatings of structures. Vestnik SGAU 2003; 2: 72-74. (In Russ)
9. Petrov V.V. Method of successive loadings in the nonlinear theory of plates and shells. Saratov: Izd-vo SGU, 1975: 118. (In Russ)
10. Petrov V.V. Nonlinear incremental structural mechanics. M. : Infra-Engineering. 2014: 480. (In Russ)
11. Polnikov S.V. Calculation of non-linear lenticular membrane-pneumatic coatings for large-span structures using the iterative method of parameter increments with an improved numerical procedure. S.V. Polnikov, S.P. Xaritonov. [Nauchnoe obozrenie] Scientific Review. 2017; 19: 35-41(In Russ)
12. Rabinovich I.M. Questions of the theory of static calculation from structures with one-way connections. M.: Strojizdat.1975:149. (In Russ)
13. Saviczkij G.A. Wind load on buildings. M.: Izvo lit. according to the building 1972: 111. (In Russ)
14. Simiu E`, Skanlan R. Influence of wind on buildings and structures. M.: Strojizdat. 1984:360. (In Russ)
15. SP 20.13330.2016 «Nagruzki i vozdejstviya» Loads and impacts (In Russ)
16. Streng G., Fiks D. Theory of finite element method. Mir. 1977: 349. (In Russ)
17. Belostosky, A.M. Adaptive Finite Element Models Coupled with Structural Health Monitoring Systems for Unique Buildings /A.M. Belostosky, P.A. Akimov. Procedia Engineering. 2016; 153: 83–88.
18. Belostotsky, A.M. Contemporary Problems of Numerical Modelling of Unique Structures and Buildings / A.M. Belostotsky, P.A Akimov., I.N. Afanasyeva, T.B. Kaytukov. International Journal for Computational Civil and Structural Engineering. 2017; 13(2): 9–34.
19. Travush V.I. Contemporary Digital Technologies in Construction Part 1: About Mathematical (Numerical) Modelling / V.I. Travush, A.M. Belostosky, P.A. Akimov. DOI 10.1088/1757-899X/456/1/012029 . IOP Conference Series: Materials Science and Engineering. 2018; 456.
20. Schulz M., Pellegrino S. Equilibrium paths of mechanical systems with unilateral constraints. Part I. Theory. Pro-ceeding of the Royal Society. Ser. A. 2000; 456(8): 2223–2242.
Review
For citations:
Kim A.Yu., Amoyan M.F., Khapilin V.E. Algorithm for numerical calculation of nonlinear lenticular membrane-pneumatic systems by iterative method of parameter increments taking into account the aftereffect of air pressure. Herald of Dagestan State Technical University. Technical Sciences. 2022;49(2):133-142. (In Russ.) https://doi.org/10.21822/2073-6185-2022-49-2-133-142